Trailed Horizontal TMR Feed Mixer

• Horizontal auger mixing system for efficient cutting, conveying and blending of fibrous feed materials.
• Suitable for silage, hay, straw, semi-dry forage, concentrates and other ration ingredients.
• Trailed design enables operation with a compatible agricultural tractor.
• High-strength mixing chamber designed for intensive livestock-farm operating conditions.
• Cutting knives help process long-fiber forage while the augers continuously circulate the ration.
• Uniform mixing helps reduce ingredient separation and supports consistent nutrient intake.
• Hydraulic discharge system provides controlled unloading of prepared feed.
• Optional electronic weighing system supports accurate ration formulation and batch management.
• Multiple capacities and equipment configurations are available according to project requirements.

• Mixing Chamber: Reinforced steel body designed to withstand continuous loading and mixing of dense and fibrous feed materials.
• Main Horizontal Auger: Performs primary cutting and circulation of forage inside the mixing chamber.
• Auxiliary Augers: Move material through the chamber and assist in achieving a homogeneous ration.
• Cutting Knives: High-strength blades mounted on the auger assembly for processing hay, straw and other long-fiber material.
• Transmission System: Transfers tractor power to the mixing mechanism through the PTO driveline and gearbox.
• Hydraulic Discharge Gate: Controls the discharge of mixed feed from the chamber.
• Weighing System: Optional load-cell-based weighing equipment for ingredient loading and ration control.
• Trailer Chassis: Heavy-duty frame, axle, tires and drawbar designed for movement around livestock farms.

• Commercial dairy farms and dairy cattle feeding centers.
• Beef cattle breeding and finishing farms.
• Sheep and goat farms using Total Mixed Ration feeding programs.
• Large livestock farms with centralized feed preparation systems.
• Silage, hay and straw-based ration preparation.
• Farm expansion and modernization projects.
• Livestock equipment distributors, agricultural contractors and integrated farm projects.

• Mixing Capacity: Customizable according to herd size and daily feed demand.
• Auger and Knife Configuration: Available according to feed composition and cutting requirements.
• Weighing System: Optional digital weighing and load-cell configurations.
• Discharge Arrangement: Customizable according to feeding lane and material-handling requirements.
• Tractor Matching: Selected according to mixer capacity and local tractor specifications.
• Paint and Branding: Available upon request.
• Electrical and Hydraulic Components: Configured according to project requirements.
• Climate Adaptation: Designed according to local climate and farm conditions.

• Match the mixer with a tractor that meets the specified PTO and power requirements.
• Connect the drawbar, PTO shaft and hydraulic lines according to the operating instructions.
• Check PTO guards, drawbar connections, tires and hydraulic fittings before operation.
• Inspect cutting knives and augers regularly for wear or damage.
• Keep the mixing chamber free from accumulated corrosive residues after operation.
• Lubricate bearings, PTO joints and transmission components according to the maintenance schedule.
• Check gearbox oil and hydraulic components periodically.
• Inspect load cells and weighing equipment regularly when a weighing system is installed.
• Replace worn knives, seals and transmission components when required to maintain mixing performance.

Q: What feed materials can the horizontal TMR mixer process?
A: It is designed for typical ruminant ration ingredients including silage, hay, straw, chopped forage, concentrates, minerals and supplementary feed materials.

Q: Can long-fiber hay and straw be added directly?
A: Yes. The horizontal auger and cutting-knife system is designed to process fibrous materials while mixing them with other ration ingredients.

Q: What tractor is required?
A: Tractor power depends on mixer capacity and configuration. The referenced 12 m³ model is matched with approximately 100–120 HP and a 540 rpm PTO.

Q: Is an electronic weighing system available?
A: Yes. A weighing system can be supplied as an optional configuration for more accurate ingredient loading and ration management.

Q: Can different capacities be supplied?
A: Yes. Multiple horizontal mixer capacities are available, and the final configuration can be selected according to herd size, ration volume and project requirements.

Q: Can the mixer be customized for an overseas livestock project?
A: Yes. Capacity, tractor matching, discharge configuration, weighing equipment, paint, branding and other specifications can be customized according to project requirements.