Wean-to-Finish Wet-Dry Pig Feeder

The Wean-to-Finish Wet-Dry Pig Feeder is a heavy-duty feeding system designed to serve pigs from the post-weaning stage through grower and finishing production. It combines controlled dry-feed delivery with integrated drinking nipples, allowing pigs to consume feed dry or mix feed and water directly in the trough.

The two-sided configuration provides feeding access from both sides and is well suited to installation between adjacent pens. A low trough lip and protected lower structure make the feeder practical for smaller pigs while maintaining the strength required for heavier finishing animals.

Welded stainless steel construction, adjustable feed flow and flexible mounting options make the feeder suitable for commercial pig farms, steel structure pig houses and automated feeding projects.

• Wean-to-Finish Application: Designed to support pigs from approximately 6 kg through commercial finishing weights.
• Two-Sided Feeding: Provides feeding access from both sides for efficient use between adjoining pens.
• Wet-Dry Feeding: Pigs can consume dry feed from the shelf or combine feed and water in the trough.
• Heavy-Duty Stainless Steel: Robust welded stainless steel construction supports long-term use in intensive pig production.
• Adjustable Feed Flow: Fine mechanical adjustment allows feed delivery to be matched to pig size, ration type and intake.
• One Nipple per Feed Space: Integrated drinking points provide convenient access to water at the feeder.
• Low Trough Lip: Improves access for smaller pigs entering the wean-to-finish system.
• Lower Passage Guard: Helps prevent small pigs from moving underneath the waterline area.
• Reduced Feed and Water Waste: Controlled feed and water delivery helps maintain a cleaner feeding area.
• Flexible Installation: Multiple mounting positions support concrete floors, slatted floors and gate-mounted layouts.

• Stainless Steel Hopper: Heavy-duty feed storage chamber for dry ration.
• Two-Sided Feed Shelf: Allows pigs on both sides to consume feed in dry form.
• Wet-Dry Trough: Lower trough area where feed can be mixed with drinking water.
• Feed-Space Dividers: Separate feeding positions and organize pig access.
• Feed Adjustment Mechanism: Regulates the opening between the hopper and feed shelf.
• Drinking Nipples: One nipple per feeding space in the reference configuration.
• One-Piece Waterline: Simplifies water connection and reduces potential connection points.
• Lower Guard: Prevents smaller pigs from crossing underneath the waterline area.
• Mounting Points: Multiple holes and knockouts support different installation arrangements.

Dry feed is delivered into the hopper manually or through an automatic feed line. An adjustable dispensing opening meters feed onto the shelf according to the selected feed-flow setting.

Pigs can consume feed directly from the shelf or activate the nipple drinker to introduce water into the trough and create wet feed. This allows individual animals to select their preferred feed-to-water consistency.

The two-sided structure allows a centrally positioned feeder to serve pigs from neighboring pen areas while reducing the number of separate feeding stations required in the barn.

• Wean-to-finish pig houses
• Grow-to-finish production systems
• Commercial finishing pig barns
• Large-scale integrated swine farms
• Two-pen shared feeder layouts
• Automatic pig feeding projects
• Concrete and slatted-floor pig houses
• Prefabricated steel structure pig houses
• Pig farm renovation and feeding-system upgrade projects

• Feeder length and number of feed spaces
• Hopper capacity
• Extended hopper configuration
• Pyramid hopper extension
• Feeder cover available for suitable applications
• Water regulator and nipple configuration
• Automatic feed-line connection
• Concrete-floor, slatted-floor or gate mounting
• Single-sided configuration available upon request
• Dedicated water-space configuration available upon request
• Complete feeder layout according to project requirements

Installation:

• Confirm feeder size, pen layout, flooring type and access from both sides.
• Select mounting brackets suitable for the floor or gate structure.
• Position the feeder level and securely fasten all mounting points.
• Connect the waterline and confirm correct nipple operation and water pressure.
• Connect feed tubes where an automatic feed delivery system is used.
• Set the initial feed opening according to pig size and ration characteristics.
• Test feed flow, water delivery, mounting stability and animal access before commissioning.

Maintenance:

• Remove stale or excessively wet feed from shelves and troughs regularly.
• Check nipples and waterlines for leakage, blockage or abnormal flow.
• Adjust feed flow as pig weight, feed formulation and intake change.
• Inspect welds, dividers, mounting brackets and fasteners periodically.
• Wash and disinfect the feeder between production batches.
• Inspect automatic feed connections and water-control accessories during scheduled maintenance.

Q1: What is a wean-to-finish wet-dry feeder?

It is a feeder designed to remain in use from the post-weaning stage through finishing, combining adjustable dry-feed delivery with drinking nipples at the feeding trough.

Q2: What pig weight range can the feeder accommodate?

The reference configuration is designed for pigs from approximately 6 kg through 130 kg or more, depending on farm management and final feeder selection.

Q3: Can pigs eat dry feed from this feeder?

Yes. Pigs can consume feed dry from the shelf or activate the water nipple and combine water with feed in the trough.

Q4: How many pigs can one feeder serve?

Capacity depends on feeder size and production conditions. Reference two-sided models provide approximately 12-16 pigs per feeding space.

Q5: Can the feed flow be adjusted?

Yes. Fine mechanical adjustment allows feed flow to be adapted as pigs grow or feed characteristics change.

Q6: Can the feeder connect to an automatic feed line?

Yes. Feed tube holders and hopper connections can be incorporated for compatible automatic feed delivery systems.

Q7: Can hopper capacity be increased?

Yes. Extended hopper and additional hopper-extension configurations are available according to project requirements.

Q8: Can the feeder be installed on slatted flooring?

Yes. Suitable mounting systems can be provided for compatible concrete and slatted-floor installations.

Q9: What information is required for a quotation?

Please provide the pig weight range, pigs per pen, pen dimensions, flooring type, required feeder quantity, automatic feed-line requirements, water supply conditions and project location.