| Product Showcase | Content | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Name | Low-Voltage Multi-Color LED Dimmer for Poultry Houses | ||||||||||||
| Product Image |
Reference product image. Supplied appearance may vary by configuration. |
||||||||||||
| Product Overview | This dimmer is intended for poultry lighting systems that use two controllable LED color groups. It allows farm operators to adjust each group's brightness and create a suitable color balance for different lighting programs. It can be specified as part of a new poultry house project or a compatible lighting retrofit. The complete system must be matched to its controller, dimmable power supplies and LED fixtures. | ||||||||||||
| Key Features |
|
||||||||||||
| Structural Components | A typical arrangement includes a control module, separate color-group adjustment controls, a dimming-signal input and two control outputs. Compatible power supplies, LED fixtures, cabling and a protective enclosure form part of the wider lighting system. The supplied components should be confirmed before ordering. | ||||||||||||
| Working Principle | In a compatible 0–10 V arrangement, one dimming command can be divided into two separately adjustable control signals. Each signal governs a corresponding group of dimmable power supplies, allowing the two LED colors to be dimmed individually or blended. The dimmer controls the lighting system through the specified power supplies; electrical compatibility must be verified for the selected fixtures. | ||||||||||||
| Technical Specifications |
|
||||||||||||
| Applications | Suitable for compatible lighting systems in broiler, layer, breeder and pullet houses. For mixed livestock projects, suitability for pig farm buildings or other animal housing should be assessed against the required fixtures and lighting program. Control panels can be planned alongside the electrical services of steel-structure farm buildings. | ||||||||||||
| Customization Options | System design can be reviewed against house dimensions, fixture layout, required light colors, power-supply type, existing controller interface and control-panel location. Cable routing and enclosure selection can be designed according to local climate and farm conditions. | ||||||||||||
| Installation & Maintenance | Install the control device in a suitable protected enclosure and connect it according to the approved wiring diagram. A qualified electrician should verify signal polarity, power-supply compatibility and the response of both color groups before commissioning. Keep the enclosure closed during farm operation and inspect terminals, cables and control response during routine maintenance. | ||||||||||||
| Product FAQ |
Can it control any LED lamp? Can the two colors be adjusted separately? What information is needed for a quotation? |
||||||||||||
| Product Gallery |
Reference product images. Supplied appearance may vary by configuration. |


Comments & Inquiries
Leave your questions or requirements below. We will reply as soon as possible.