| Product Name |
Smart Tire Biosecurity Disinfection System |
| Product Image |
 |
| Product Overview |
The Smart Tire Biosecurity Disinfection System is an automatic vehicle sanitation solution designed for controlled entrances of commercial pig farms, poultry farms, cattle farms, breeding facilities, feed mills and other livestock production sites.
The system detects an approaching vehicle and activates a programmed spray cycle, directing disinfectant solution toward the tires, wheels and accessible lower vehicle surfaces. Strategically positioned spray nozzles provide targeted coverage while an integrated control system manages activation, dosing and operating cycles.
A modular platform, spray assembly, chemical dosing unit, sensor system and wastewater collection arrangement can be configured as a complete vehicle biosecurity station. The system can be installed as a surface-mounted unit or incorporated into a prepared foundation according to the project design.
The modular structure is suitable for new pig farm construction, poultry house projects, livestock facility upgrades and agricultural engineering projects where reliable vehicle traffic control is required. Dimensions, spray coverage, control functions and structural configuration are customizable according to vehicle types, local climate and farm conditions. |
| Key Features |
- Automatic Vehicle Detection: Entry sensors can initiate the disinfection cycle when a vehicle reaches the treatment zone.
- Targeted Tire Coverage: Spray nozzles are positioned around the vehicle path to treat tires and wheel areas.
- Undercarriage Integration: Low-level spray bars can be incorporated for additional treatment of accessible underbody surfaces.
- Smart Control: Spray duration, activation logic and dosing parameters can be configured according to project requirements.
- Automatic Chemical Dosing: An adjustable dosing unit can be integrated for controlled preparation of the disinfectant solution.
- Contained Runoff: A collection tray and drainage connection can be incorporated to control contaminated wastewater.
- Heavy-Duty Structure: Galvanized steel and other corrosion-resistant materials are available for demanding farm environments.
- Drive-Through Operation: Vehicles can pass through the treatment area without requiring manual spraying by the driver.
- Commercial Farm Application: Suitable for feed trucks, livestock transporters, waste vehicles, service vehicles and visitor vehicles.
- Surface-Mounted Installation: The system can be configured for installation on a suitable concrete, asphalt or engineered hardstanding surface.
- Permanent or Modular Layout: Available for new construction projects as well as farm entrance upgrades.
- Expandable Design: Additional wheel, chassis, undercarriage or overhead spray modules can be integrated where required.
|
| Structural Components |
- Vehicle Disinfection Platform: Load-bearing platform supporting the vehicle passage and spray assembly.
- Galvanized Steel Frame: Provides structural support and protection in agricultural operating environments.
- Side Spray Bars: Vertical or angled spray assemblies direct disinfectant toward tires and wheel areas.
- Underside Spray Bar: Optional low-level spray line for additional treatment beneath the vehicle.
- Fine Spray Nozzles: Strategically positioned nozzles create the required spray pattern around the vehicle.
- Vehicle Detection Sensor: Photocell, proximity sensor or other detection device for automatic activation.
- Chemical Dosing Unit: Provides controlled introduction of disinfectant concentrate into the spray circuit.
- Pump Assembly: Supplies the required pressure and flow to the spray nozzles; specification is selected according to the final design.
- Control Cabinet: Houses electrical controls and system interfaces according to the selected automation configuration.
- Water Tank: Optional integrated or external tank according to water supply conditions and project requirements.
- Wastewater Collection Tray: Collects spray runoff for controlled drainage or wastewater treatment.
- Drainage Connection: Can be connected to the farm's approved wastewater management system.
- Access Ramps: Optional low-profile ramps can be provided for surface-mounted installations.
|
| Working Principle / Structural Principle |
The system operates as an automated drive-through vehicle biosecurity barrier. When a vehicle enters the designated treatment area, an entry sensor detects its position and sends a signal to the control system.
The controller activates the pump and spray circuit according to the programmed operating sequence. Disinfectant solution is delivered through strategically positioned nozzles along the sides and lower section of the platform, targeting tires, wheels and accessible undercarriage surfaces.
The chemical dosing system can introduce disinfectant concentrate into the water supply at an adjustable rate. Spray duration and activation sequence can be configured according to the selected disinfectant, vehicle traffic and farm biosecurity SOP.
The platform and side screens can help contain overspray and direct wastewater toward a collection or drainage point. The final drainage arrangement should be coordinated with the farm's wastewater management plan.
For broader vehicle treatment, the tire system can be combined with an overhead spray arch, chassis spray line or additional side spray modules. Automatic vehicle disinfection is used in farm biosecurity systems to reduce reliance on manual spraying procedures. :contentReference[oaicite:0]{index=0} |
| Technical Specifications |
| Product Type |
Automatic tire and vehicle biosecurity disinfection system |
| Primary Application |
Vehicle tires, wheels and accessible lower vehicle surfaces |
| Activation |
Automatic sensor activation; manual control available according to configuration |
| Installation Type |
Surface-mounted, inset or project-specific fixed installation |
| Structural Material |
Galvanized steel, stainless steel and other suitable materials available according to project requirements |
| Spray Nozzles |
Quantity, type, spacing and spray angle customizable according to vehicle dimensions and required coverage |
| Pump Pressure |
According to project requirements and selected nozzle configuration |
| Pump Flow |
According to project requirements and final spray circuit design |
| Chemical Dosing |
Adjustable dosing system available upon request |
| Spray Cycle |
Programmable according to farm traffic, vehicle type and biosecurity procedure |
| Vehicle Clearance |
Customizable according to vehicle dimensions and project layout |
| Power Supply |
According to local electrical standards and selected pump/control configuration |
| Water Supply |
Mains water or project-specific water supply system |
| Wastewater Collection |
Collection tray and drain connection available according to project requirements |
| Control System |
Sensor-controlled automatic operation with optional programmable control functions |
Final pressure, flow rate, nozzle quantity, vehicle clearance, electrical specification, platform dimensions and structural loading should be confirmed according to the project design. Comparable commercial systems use sensor activation, targeted spray bars, adjustable chemical dosing and contained wastewater collection. :contentReference[oaicite:1]{index=1}
|
| Applications |
- Commercial Pig Farms: Automated tire and wheel treatment for feed delivery, livestock transport and service vehicles.
- Poultry Farms: Vehicle biosecurity at poultry house entrances, farm gates and controlled access points.
- Cattle and Dairy Farms: Disinfection of agricultural and livestock transport vehicles before entering production areas.
- Breeding Farms: Controlled vehicle sanitation between external traffic and high-biosecurity production zones.
- Feed Mills: Vehicle treatment for delivery trucks and logistics vehicles entering controlled areas.
- Livestock Transport Facilities: Automated sanitation for livestock trailers and heavy commercial vehicles.
- Veterinary and Animal Health Facilities: Vehicle disinfection at controlled-access sites.
- Agricultural Engineering Projects: Integration into complete farm entrance and biosecurity systems.
- New Pig Farm Construction: Coordination with roadway, fencing, drainage, electrical and clean/dirty zone design.
- Farm Renovation Projects: Upgrade of existing entrances with automated vehicle sanitation equipment.
Vehicle disinfection is used as part of biosecurity programs because tires, wheel arches and undercarriage areas can carry contamination between agricultural sites. :contentReference[oaicite:2]{index=2}
|
| Customization Options |
- Platform Dimensions: Designed according to vehicle width, wheel track, traffic direction and site constraints.
- Nozzle Layout: Nozzle quantity, spacing, height and spray angle can be engineered for the target vehicle fleet.
- Spray Coverage: Tire-only, tire-and-wheel, or extended chassis and undercarriage coverage configurations are available.
- Automation: Photocells, proximity sensors, programmable controllers and automatic valves can be integrated.
- Chemical Dosing: Adjustable dosing equipment can be matched to the selected disinfectant and farm SOP.
- Structural Materials: Galvanized steel, stainless steel and other corrosion-resistant materials can be selected according to local climate and chemical exposure.
- Traffic Direction: Single-direction or two-way vehicle activation can be configured according to the site layout.
- Installation Method: Surface-mounted or inset installation can be selected according to civil engineering conditions.
- Wastewater Management: Collection trays, drain valves and wastewater connections can be designed according to the farm drainage plan.
- Climate Adaptation: Freeze protection, weather protection and other site-specific measures are available according to local climate conditions.
- Vehicle Types: System geometry can be designed for cars, tractors, feed trucks, livestock transporters, tankers and articulated vehicles.
- OEM / ODM: Custom engineering drawings, technical documentation, branding and packaging are available upon request.
|
| Installation & Maintenance |
Installation: The system should be installed on a stable, level hardstanding or prepared foundation suitable for the expected vehicle load. For new livestock facilities, the equipment should be coordinated with the farm road, drainage, electrical supply and biosecurity zoning during the engineering stage.
- Confirm vehicle dimensions, axle load, traffic direction and required spray coverage.
- Prepare the concrete, asphalt or engineered base according to the approved installation drawing.
- Position the platform, ramps, side screens and spray assemblies.
- Secure the frame and connect the spray piping and pump system.
- Install the vehicle detection sensor and control cabinet.
- Connect the water supply and chemical dosing system.
- Connect the wastewater collection and drainage arrangement.
- Test sensor activation, pump operation, spray direction and nozzle coverage.
- Adjust the spray cycle and chemical dosing according to the approved farm biosecurity procedure.
- Inspect nozzles regularly and remove mud, sediment or chemical deposits.
- Clean filters and inspect pump, valves, hoses and pipe connections according to the maintenance schedule.
- Check sensors and automatic controls for reliable vehicle detection.
- Inspect galvanized or stainless structural components for damage or corrosion.
- Keep the spray platform and treatment zone free from excessive organic contamination.
- Manage collected wastewater according to local environmental requirements and the farm wastewater plan.
- Use disinfectants only according to the product manufacturer's instructions and the farm's approved biosecurity SOP.
Comparable systems are designed for easy maintenance and can use surface-mounted installation without excavation, while inset configurations are available for permanent projects. :contentReference[oaicite:3]{index=3}
|
| Project Cases |
Commercial Livestock Farm Entrance: A sensor-controlled tire disinfection station can be installed at the main farm gate to automatically treat feed trucks, livestock transporters and service vehicles.
Poultry Farm Biosecurity Upgrade: An automated spray platform can be integrated into an existing vehicle entrance to establish a defined sanitation point between external traffic and controlled poultry production areas.
Large Livestock Project: Spray coverage, platform dimensions and vehicle clearance can be engineered for frequent heavy truck traffic and articulated vehicles.
New Pig Farm Construction: The system can be incorporated into the overall pig farm construction plan together with farm roads, steel structures, drainage, electrical infrastructure, fencing and biosecurity zoning.
High-Traffic Agricultural Facility: Automatic entry and exit sensors can be configured for controlled two-way traffic where required.
Site-Specific Biosecurity Engineering: Comparable industry projects have been modified for unusual vehicle clearances, weather conditions, traffic volumes and site layouts, demonstrating the value of project-specific engineering. :contentReference[oaicite:4]{index=4} |
| Product FAQ |
Q: What is a Smart Tire Biosecurity Disinfection System?
A: It is an automated vehicle-entry disinfection system that detects vehicles and applies a controlled disinfectant spray to tires, wheels and selected lower vehicle surfaces.
Q: How does automatic tire disinfection work?
A: A vehicle sensor detects the vehicle entering the treatment area and activates the pump and spray circuit. Strategically positioned nozzles then apply the prepared disinfectant solution during the programmed cycle.
Q: Is the system suitable for commercial pig farms?
A: Yes. The system is designed for livestock farm entrances and can be configured for feed trucks, livestock transporters, service vehicles and other farm traffic.
Q: Does it disinfect the whole vehicle?
A: The core configuration focuses on tires and wheel areas. Additional spray bars or an overhead arch can be incorporated when chassis, underbody or other vehicle surfaces require treatment.
Q: Can the system work automatically without an operator?
A: Yes. Automatic vehicle detection and programmed spray cycles can eliminate the need for the driver to manually operate the spray equipment during normal operation. :contentReference[oaicite:5]{index=5}
Q: Can chemical dosing be automated?
A: Yes. An adjustable dosing unit can be integrated to control the addition of compatible disinfectant concentrate according to the selected farm procedure.
Q: Can it handle large livestock trucks?
A: Yes. Platform width, vehicle clearance, nozzle arrangement and structural loading can be designed according to the dimensions and operating conditions of the target vehicle fleet.
Q: Can it be installed without excavation?
A: A surface-mounted configuration can be designed for installation on a suitable hardstanding. An inset installation is also available when a flush permanent installation is preferred. :contentReference[oaicite:6]{index=6}
Q: What disinfectants can be used?
A: The compatible disinfectant should be selected according to the farm biosecurity protocol, equipment material compatibility and the disinfectant manufacturer's instructions. Comparable systems support commonly used disinfectants with adjustable dosing. :contentReference[oaicite:7]{index=7}
Q: Can it be customized for a new farm construction project?
A: Yes. Platform dimensions, spray coverage, vehicle clearance, structural materials, sensor arrangement, dosing, drainage and electrical configuration can be designed according to project requirements.
Q: Can the system be combined with other biosecurity equipment?
A: Yes. It can be integrated with vehicle disinfection arches, undercarriage spray modules, high-pressure cleaning equipment, chemical dosing units and controlled wastewater collection systems.
|
| Product Gallery |
 |
Comments & Inquiries
Leave your questions or requirements below. We will reply as soon as possible.