Product Name	Portable Water EC/TDS Meter
Product Image
Product Overview	The Portable Water EC/TDS Meter is a compact field-testing instrument designed for rapid measurement of electrical conductivity, total dissolved solids and, depending on configuration, water temperature. It is suitable for routine water quality inspection in poultry farms, pig farms, cattle facilities and other commercial livestock operations. Farm managers and service technicians can use the meter at source-water points, storage tanks, water treatment equipment outlets, header tanks and livestock drinking-line endpoints. Portable testing makes it practical to compare water conditions at several locations without installing permanent measuring equipment. Electrical conductivity provides an indication of the concentration of dissolved ionic substances in water, while TDS provides an estimated dissolved-solids value based on the measured conductivity and selected conversion method. For livestock engineering projects, these measurements can support drinking-water system commissioning, treatment adjustment and routine preventive maintenance.
Key Features	EC and TDS Measurement: Combines conductivity and total dissolved solids testing in one portable instrument. Portable Field Design: Compact construction allows technicians to inspect multiple livestock buildings, tanks and drinking-water points efficiently. Digital Display: Provides direct measurement values for convenient on-site reading and recording. Temperature Measurement: Available on suitable configurations for checking sample temperature during water quality testing. Temperature Compensation: Automatic temperature compensation is available according to selected configuration to improve consistency when conductivity is measured at different sample temperatures. Simple Operation: Designed for routine farm inspections without complex laboratory equipment. Protective Probe Cap: Helps protect the sensing area during transport and storage. Flexible Selection: Measurement range, calibration method, electrode configuration and accessories can be selected according to project requirements.
Structural Components	Digital Display: Shows EC, TDS and available temperature information according to meter configuration. Control Buttons: Used for power, measurement-mode selection, data hold or calibration functions depending on the selected model. Conductivity Sensor: Detects the electrical conductivity of the water sample. Temperature Sensor: Available on suitable configurations for temperature measurement and compensation. Electronic Processing Module: Converts sensor signals into digital EC and calculated TDS values. Battery Compartment: Provides portable power for field operation. Protective Cap: Covers the sensor area during transport and storage. Portable Housing: Compact enclosure designed for routine agricultural and livestock water-quality inspection.
Working Principle / Structural Principle	The conductivity sensor is placed in a representative water sample. The instrument applies an electrical measurement through the sensing element and determines the conductivity of the sample from its electrical response. Water containing a higher concentration of dissolved ions generally produces higher electrical conductivity. The meter displays the conductivity value in the selected measurement unit. TDS is normally calculated from electrical conductivity using a conversion factor. Because the relationship between conductivity and actual dissolved solids depends on the composition of the water, TDS should be treated as an estimated value rather than a complete chemical analysis. Temperature affects conductivity. Suitable portable meters therefore use temperature measurement and compensation functions to improve comparison between samples tested under different temperature conditions.
Technical Specifications	Product Type: Portable digital EC/TDS water quality meter Measurement Parameters: Electrical conductivity and total dissolved solids Temperature Measurement: Available according to selected configuration EC Measurement Range: According to selected model and project requirements TDS Measurement Range: According to selected model and project requirements Measurement Resolution: According to selected configuration EC/TDS Accuracy: According to selected configuration Temperature Compensation: Automatic or model-dependent configuration available TDS Conversion Factor: Fixed or adjustable according to selected model Calibration: Automatic or manual according to selected configuration Display: Digital LCD Data Hold: Available according to selected configuration Automatic Shut-Off: Available according to selected configuration Sensor Type: Conductivity electrode configuration according to selected model Replaceable Sensor: Available upon request Housing: Portable handheld construction Power Supply: Battery powered Protection Level: According to selected configuration Carrying Case: Available upon request Calibration Solutions: Available upon request
Applications	Pig Farm Drinking Water: Routine EC and TDS inspection at source water, tanks, treatment equipment and drinking-line endpoints. Poultry Drinking Systems: Suitable for broiler, layer and breeder farm water quality checks. Cattle and Calf Farms: Portable testing of drinking water supplied to troughs, tanks and automatic watering systems. Farm Water Treatment: Useful for comparing water before and after filtration, softening, reverse osmosis or other treatment processes. Water Storage Tanks: Spot testing of stored water as part of routine farm maintenance programs. Drinking-Line Commissioning: Supports inspection during new livestock equipment and farm construction projects. Agricultural Irrigation: Can be used for general conductivity and dissolved-solids checks where the selected measuring range is suitable. Field Service: Suitable for agricultural engineering contractors, livestock equipment distributors and farm maintenance teams.
Customization Options	Measurement Range: Different EC and TDS ranges available according to project requirements. Temperature Function: Available according to selected configuration. Electrode Configuration: Different conductivity sensor structures available upon request. Calibration Method: Manual or automatic calibration options according to selected model. TDS Conversion: Fixed or adjustable conversion factor available according to configuration. Protective Case: Available for field service and transportation. Calibration Solutions: Conductivity standards can be supplied as part of a complete testing package. Water Testing Kit: EC/TDS meters can be combined with pH, ORP, dissolved oxygen or other portable farm water-testing instruments. Project Package: Testing equipment can be configured according to livestock species, farm size, water source and maintenance requirements.
Installation & Maintenance	The portable EC/TDS meter does not require permanent installation. Before testing, inspect the sensing area and confirm that it is clean and free from dried deposits or visible contamination. Calibrate the meter using a suitable conductivity standard according to the selected instrument instructions and farm quality-control requirements. Use clean containers when collecting water samples to avoid contamination from detergents, disinfectants or previous samples. Place the sensing section into the water sample to the recommended immersion depth and allow the displayed value to stabilize before recording the measurement. Avoid immersing parts of the meter that are not designed for water exposure. After each test, rinse the sensing area with clean water and remove residual sample deposits. Do not scrape or mechanically damage the electrode surface. Store the meter with the protective cap fitted and keep calibration materials properly sealed. Periodic calibration should be included in routine maintenance, especially when the meter is used frequently or when reliable comparison between different farm locations is required.
Project Cases	Commercial Pig Farm Inspection: Maintenance personnel can compare EC and TDS values at the borehole or municipal supply, storage tank, treatment-room outlet and farthest drinking-line endpoint. Broiler Farm Water Management: Portable testing can be included in regular water-system inspections to identify significant changes between incoming water and drinking-line samples. Farm Water Treatment Commissioning: Measurements before and after treatment equipment can support basic verification during equipment adjustment and project handover. Multi-House Livestock Project: One portable tester can be carried between several livestock houses for standardized spot inspections when the same testing procedure is used. After-Sales Service: Livestock equipment technicians can use a portable EC/TDS meter during troubleshooting of farm drinking-water and treatment systems.
Product FAQ	Q: What does an EC meter measure? A: It measures the electrical conductivity of water, which is influenced by the concentration of dissolved ions in the sample. Q: What does the TDS reading represent? A: TDS is an estimated total dissolved solids value calculated from conductivity using a conversion factor. Q: Can this meter determine whether livestock drinking water is safe? A: EC and TDS are useful screening parameters, but they do not identify specific microorganisms, chemicals or toxic substances. Complete water-quality assessment may require additional laboratory or field tests. Q: Can it be used directly at a livestock drinking line? A: Yes. A representative sample can be collected from a suitable line endpoint or drinker and tested according to the meter operating procedure. Q: Does temperature affect conductivity readings? A: Yes. Conductivity changes with temperature, which is why suitable meters use temperature compensation for more consistent comparisons. Q: How often should the meter be calibrated? A: Calibration frequency depends on measurement frequency, required accuracy, water conditions and the selected meter manufacturer's recommendations. Q: Can calibration solutions be supplied? A: Yes. Suitable conductivity calibration standards are available upon request. Q: Can the meter be included in a larger farm water-testing kit? A: Yes. It can be supplied with pH, ORP, dissolved oxygen and other water-quality testing instruments according to project requirements.
Product Gallery