Product Showcase	Content
Product Name	Livestock House High-Precision Humidity Sensor
Product Image
Product Overview	The Livestock House High-Precision Humidity Sensor is designed for continuous relative humidity monitoring in commercial pig houses, poultry houses, calf barns, dairy buildings and other intensive livestock facilities. It provides climate-control systems with stable humidity feedback so ventilation, heating and other environmental equipment can operate according to actual house conditions. Its compact sensing structure is suitable for demanding agricultural environments where dust, moisture, cleaning procedures and long operating hours place additional requirements on environmental sensors. The sensor can be integrated with livestock climate controllers, ventilation control panels and centralized farm management systems according to project requirements.
Key Features	High-precision measurement of relative humidity for livestock climate management. Designed for continuous operation in humid, dusty and demanding livestock-house environments. Suitable for commercial pig farms, poultry farms and other intensive animal-production buildings. Stable analogue signal transmission for connection to compatible climate controllers. Low output resistance supports reliable signal transmission to control equipment. Protection against short circuits and incorrect wiring can be incorporated according to the selected configuration. Integrated operating-status and diagnostic indication can simplify inspection and troubleshooting. Protective accessories are available for cleaning and maintenance applications. Easy integration into new-build livestock houses and renovation projects. Output signal, cable configuration and controller interface can be customized according to project requirements.
Structural Components	Humidity Sensing Element: Detects changes in relative humidity within the livestock house. Protective Sensor Housing: Shields the electronics and sensing components from the demanding agricultural environment. Air-Exposure Section: Allows surrounding house air to reach the humidity-sensing element. Signal Processing Electronics: Converts the sensor response into a stable output signal for the livestock climate controller. Status Indicator: Depending on configuration, provides visual operating or diagnostic information. Connection Cable: Transfers power and humidity signals to the climate-control or farm management system. Cleaning Protection Accessory: Available upon request for protecting the sensing area during washing or disinfection procedures.
Working Principle / Structural Principle	The sensing element continuously responds to the moisture content of the surrounding air and converts this change into an electrical measurement corresponding to relative humidity. Internal electronics process the signal and transmit it to the connected livestock climate controller. The controller can use humidity information together with temperature, ventilation and other environmental data to manage exhaust fans, air inlets, heating equipment, cooling systems or alarm functions. This supports more consistent environmental control and helps farm operators respond to excessive moisture, insufficient ventilation or unsuitable indoor climate conditions.
Technical Specifications	Measured Parameter Relative Humidity (RH) Application Environment Livestock houses and agricultural climate-control systems Measurement Accuracy High-precision configuration; detailed accuracy available upon request Signal Type Analogue output; configuration according to controller requirements Controller Interface Customizable according to livestock climate-control system Environmental Protection Designed for humid and dusty livestock-house conditions; protection level according to selected model Cable Length Standard or customized lengths available upon request Power Supply According to selected output and project controller requirements Mounting Method Suspended or bracket-mounted according to installation layout
Applications	Commercial pig houses and breeding sow facilities Farrowing, nursery, growing and finishing pig buildings Broiler, layer and breeder poultry houses Dairy barns, calf houses and cattle buildings Livestock ventilation and environmental-control systems Negative-pressure and tunnel-ventilated livestock buildings Steel structure livestock house construction projects Central farm monitoring and intelligent climate-management projects Agricultural engineering projects requiring continuous humidity feedback
Customization Options	SHEWUYOU can configure humidity sensor solutions according to livestock type, climate-control architecture and project requirements. Available options may include output signal configuration, cable length, connector type, mounting accessories, protective caps, controller matching and project-specific installation packages. For new pig farm construction or livestock-house renovation, sensor quantity and installation positions can be designed according to house dimensions, ventilation zones, local climate conditions and the selected environmental controller.
Installation & Maintenance	Install the humidity sensor in a representative air zone with unrestricted airflow. Avoid locations exposed to direct sunlight, direct heater discharge, cooling-pad spray, water lines, strong local drafts or areas immediately adjacent to exhaust openings, as these conditions may produce readings that do not represent the overall livestock-house climate. The sensor may be suspended by its cable or installed with suitable mounting hardware according to the project design. Ensure that the sensing area remains exposed to circulating air and that electrical connections follow the controller wiring requirements. During washing and disinfection, use the specified protection method or protective cap where applicable. Avoid mechanical impact and unnecessary bending of the sensor body. Periodic inspection of the sensing surface, cable, electrical connections and controller readings is recommended as part of the farm's preventive maintenance program.
Project Cases	This type of humidity sensor can be specified for commercial livestock climate-control projects, including new pig houses, poultry-house upgrades, steel structure farm buildings and integrated ventilation projects. Multiple sensors can be installed in different climate zones and connected to a centralized environmental controller for continuous monitoring. For large farms and livestock groups, sensor quantity, installation height, zoning arrangement, cable routing and controller integration can be designed according to project requirements.
Product FAQ	Q: Is this sensor suitable for pig houses with continuously high humidity? A: Yes. It is designed for livestock-house climate monitoring and can be configured for humid commercial farm environments. Q: Can it connect to our existing climate controller? A: Controller compatibility depends on the required supply voltage, analogue signal and wiring interface. Matching configurations are available according to project requirements. Q: Can the cable length be customized? A: Yes. Cable length and connection arrangements can be customized according to installation distance and project layout. Q: Where should the humidity sensor be installed? A: It should be positioned in a representative livestock-zone airflow area and away from direct sunlight, localized heat sources, water spray and strong direct airflow. Q: Can the sensor be used with an automated ventilation system? A: Yes. Humidity data can be supplied to compatible livestock climate controllers for ventilation and environmental-management applications. Q: Is it suitable for both new farms and renovation projects? A: Yes. The sensor can be integrated into new livestock-house construction as well as existing farm climate-system upgrades.
Product Gallery