Livestock House Temperature and Humidity Sensor

The Livestock House Temperature and Humidity Sensor is designed for continuous environmental monitoring in commercial pig houses, poultry houses, breeding facilities and other intensive livestock buildings. It measures indoor temperature and relative humidity and provides the climate-control system with the environmental data required for stable ventilation, heating and cooling management.

The sensor is particularly suitable for livestock environments where moisture, dust, condensation and frequent cleaning can affect conventional measuring devices. A protected sensing element and robust housing help support reliable long-term operation in demanding farm conditions.

• Two-in-one monitoring of temperature and relative humidity.
• Designed for commercial livestock houses with variable and high humidity.
• Provides environmental feedback for automatic ventilation and climate-control systems.
• Protected sensing element helps reduce the influence of dust and challenging barn conditions.
• Suitable for pig houses, poultry houses, breeding barns and livestock project installations.
• Compact structure allows convenient wall, column or equipment-area installation.
• Low-maintenance design suitable for continuous farm operation.
• Signal and connection configuration can be selected according to project requirements.

• Sensor Housing: Durable enclosure designed to protect the internal electronics in livestock-house environments.
• Temperature Sensing Element: Detects changes in livestock-house air temperature.
• Humidity Sensing Element: Measures relative humidity for ventilation and moisture-management control.
• Protective Filter: Helps shield the sensing element while allowing representative air measurement.
• Electronic Processing Circuit: Converts sensor measurements into signals suitable for compatible farm climate controllers.
• Cable or Connector: Provides power and signal connection to the livestock-house control system.
• Mounting Components: Brackets, sensor plates or protective accessories can be supplied according to installation requirements.

The sensing elements continuously detect the temperature and relative humidity of the surrounding livestock-house air. The internal electronics process these measurements and transmit corresponding signals to a compatible climate controller, monitoring panel or farm automation system.

The controller can use the measured environmental values as part of its control strategy for exhaust fans, air inlets, heaters, cooling systems and other livestock-house equipment. Accurate environmental feedback helps maintain a more stable indoor climate and supports efficient ventilation management.

Note: Electrical interface, cable length, measuring configuration and controller compatibility should be confirmed before ordering.

• Commercial pig houses and swine production facilities.
• Farrowing rooms, nursery barns and finishing pig houses.
• Broiler, layer and breeder poultry houses.
• Livestock ventilation and environmental control systems.
• Negative-pressure, tunnel and other mechanically ventilated livestock buildings.
• Heating, evaporative cooling and air-inlet control projects.
• New livestock farm construction and existing barn modernization projects.
• Centralized farm monitoring and automation systems.

SHEWUYOU can configure the sensor solution according to livestock species, house dimensions, climate-control architecture and project requirements.

• Cable length: Customizable.
• Electrical signal configuration: Available upon request.
• Connector and wiring configuration: According to project requirements.
• Mounting bracket or installation accessories: Customizable.
• Climate controller interface: Selected according to the project control system.
• System integration: Designed according to local climate and farm conditions.

Installation:

• Install the sensor where it can measure representative livestock-house air conditions.
• Avoid locations directly exposed to heaters, cooling pads, water spray, direct sunlight or concentrated fresh-air jets unless the project design specifically requires such placement.
• Keep appropriate distance from animals and equipment that may physically damage the sensor.
• Route signal cables separately from high-power motor cables where practical to reduce electrical interference.
• Confirm wiring and controller input compatibility before energizing the system.

Maintenance:

• Inspect the sensor and protective filter regularly for dust and contamination.
• Clean according to the supplied sensor maintenance instructions.
• Protect the sensing element appropriately during intensive house washing and disinfection.
• Check displayed temperature and humidity values as part of routine climate-system inspection.
• Replace damaged cables, connectors or protective components when necessary.

Commercial Pig House Climate Monitoring: Sensors can be installed in farrowing, nursery and finishing sections to provide temperature and humidity feedback to the main climate controller.

Poultry House Environmental Control: Used with ventilation and heating controllers to monitor barn climate conditions in broiler, layer and breeder houses.

Livestock Farm Renovation: Suitable for upgrading conventional barns with automatic environmental monitoring as part of a ventilation, heating or cooling modernization project.

Q: Can one sensor measure both temperature and humidity?

A: Yes. The combined sensing design allows temperature and relative humidity to be monitored from one sensor location.

Q: Is the sensor suitable for pig houses with high humidity?

A: Yes. This type of livestock climate sensor is designed for demanding barn environments, including locations with changing or elevated humidity.

Q: Can it connect to an automatic ventilation controller?

A: Yes. The sensor can be integrated with compatible livestock climate controllers. The required input signal and wiring configuration should be confirmed before ordering.

Q: Where should the sensor be installed?

A: It should normally be installed in a representative air zone inside the livestock house and away from localized heat, water spray and direct inlet airflow unless otherwise specified by the ventilation design.

Q: Can cable length and connection type be customized?

A: Yes. Cable, connector and signal requirements can be configured according to the farm control system and project requirements.

Q: Can SHEWUYOU supply sensors for complete livestock projects?

A: Yes. Sensor selection can be coordinated with ventilation, heating, cooling, alarm and environmental control equipment for complete pig-house and poultry-house projects.