Aluminum Frame Evaporative Cooling Pad System

• 150 mm Cooling Pad: Thick cellulose media provides a large evaporation surface for livestock-house cooling.
• 600 mm Modular Pad Width: Individual pad sections simplify installation, replacement and project sizing.
• Virgin-Pulp Cellulose Media: Cooling pads are manufactured from treated cellulose paper for stable water absorption.
• Hardened Pad Sheets: Individual sheets receive curing treatment to improve structural stability.
• Anodized Aluminum Frame: Aluminum side profiles and water troughs provide corrosion resistance and a clean installation.
• Uniform Water Distribution: Proper water supply and frame design help maintain even wetting across the cooling surface.
• PVC Water Circuit: Standard PVC supply and return pipes support reliable water circulation.
• 40-Mesh Filtration: Integrated filtration helps reduce dirt entering the water-distribution system.
• Optional Rodent Protection: Double-sided 304 stainless steel rodent mesh can be supplied for farm applications.
• Flexible Installation: Suitable for recessed or external wall-mounted installation according to building design.

• Commercial pig houses
• Sow gestation and farrowing buildings
• Piglet nursery houses
• Finishing and fattening pig houses
• Broiler and layer poultry houses
• Dairy and beef cattle barns
• Sheep and goat housing
• Negative-pressure cooling systems
• Tunnel ventilation systems
• Livestock-house cooling renovation projects

• Calculate the required cooling-pad area according to total exhaust airflow and project ventilation design.
• Install the aluminum frame level and seal the perimeter to prevent uncontrolled air bypass.
• Ensure the upper water-distribution pipe wets the full pad surface evenly.
• Check the lower water trough and return-water path for unrestricted drainage.
• Clean the 40-mesh filter regularly to maintain stable circulation flow.
• Use clean water and monitor mineral content to reduce scale formation on the cooling media.
• Remove algae, dust and accumulated deposits according to farm maintenance procedures.
• Do not use excessive water pressure when washing cellulose pads.
• Allow the pads to dry periodically when operating conditions permit.
• Inspect aluminum profiles, water pipes, pump components and optional rodent mesh regularly.

Q: What is the cooling pad thickness?
A: The listed cellulose cooling pad thickness is 150 mm.

Q: What is the width of each cooling pad section?
A: Each listed pad section is approximately 600 mm wide.

Q: What material is the frame made from?
A: The side frame and water trough are made from anodized aluminum alloy.

Q: How does the cooling system reduce air temperature?
A: Hot outside air passes through the wetted cellulose media, where water evaporation absorbs heat from the air before it enters the livestock house.

Q: Can it be used with negative-pressure exhaust fans?
A: Yes. The system is typically installed opposite exhaust fans in negative-pressure or tunnel ventilation systems.

Q: Is a water filter included in the system?
A: The listed configuration includes a 40-mesh filter with an ABS housing and 304 stainless steel filter screen.

Q: Is rodent protection available?
A: Yes. Double-sided 304 stainless steel rodent mesh is available as an optional configuration.

Q: Can the cooling-pad dimensions be customized?
A: Yes. Overall frame dimensions and pad-wall layout can be designed according to the livestock-house opening and required ventilation capacity.