Product Showcase	Content
Product Name	Water-Resistant 24V Calf Dehorner
Product Image
Product Overview	The Water-Resistant 24V Calf Dehorner is a professional electric livestock tool designed for controlled thermal disbudding of young calves in dairy farms, beef breeding operations and veterinary livestock-management facilities. The system uses a mains-powered transformer to supply low-voltage 24V power to a lightweight heated handpiece. Its reference configuration reaches more than 600°C in less than five minutes and uses a 17mm replaceable heating tip. The transformer is rated IP68, making it suitable for demanding farm environments where moisture may be present. However, the dehorning handpiece itself is not waterproof and should be protected from rain, humidity and liquid splashes and used only in sheltered working areas. A lightweight ergonomic handle, extended power cable and replaceable tip make the system practical for professional calf-care routines where repeatable heating performance and operator mobility are required.
Key Features	24V Low-Voltage Handpiece: Transformer supplies low-voltage power to the heating tool for professional livestock use. IP68 Transformer: Protected transformer configuration is suitable for farm environments where wet conditions may occur. Rapid Heat-Up: Reference system reaches working temperature in less than five minutes. High Thermal Output: Heating tip operates at more than 600°C on the referenced configuration. 17mm Heating Tip: Standard reference tip diameter is designed for calf horn-bud treatment. Lightweight Handpiece: Approximately 360g reference handle weight reduces operator fatigue during repeated farm work. Ergonomic Heat-Shielded Grip: Handle geometry helps isolate the operator's hand from the heated metal section. 4m Working Cable: Provides useful reach around calf pens, handling areas and treatment facilities. Replaceable Tip: Worn heating tips can be replaced without replacing the complete system. Professional Farm Configuration: Designed for trained livestock personnel working under applicable veterinary and animal-welfare procedures.
Structural Components	IP68-rated low-voltage transformer 24V electric dehorning handpiece Ergonomic insulated handle Heat-resistant hand guard Metal heating shaft Internal electric heating element Replaceable 17mm heating tip Tip retaining screw 4m low-voltage operating cable Mains connection cable Heat-resistant resting support
Structural Principle	The transformer converts the mains electrical supply to a low-voltage 24V output for the dehorning handpiece. Electrical energy is converted into concentrated heat by the heating element positioned within the metal tip assembly. The compact thermal path allows the tip to reach a high working temperature rapidly while maintaining useful heat reserve during professional livestock-management work. The heated tip is intended only for controlled calf disbudding by authorized and appropriately trained personnel. Actual treatment procedures, calf age, restraint, anesthesia, analgesia and aftercare should follow local legislation, veterinary guidance and approved farm operating procedures.
Technical Specifications	Product Type Transformer-powered electric calf dehorner Reference Configuration 103018 type Handpiece Operating Voltage 24 V Reference Mains Supply 230 V / 50 Hz Reference Power 150 W Transformer Protection IP68 on referenced configuration Reference Heat-Up Time Less than 5 minutes Reference Tip Temperature More than 600°C Standard Tip Diameter 17 mm Reference Handpiece Weight Approx. 360 g Cable Length 4 m Operating Environment Sheltered livestock area; transformer suitable for wet-area conditions Handpiece Water Protection Protect from rain, humidity and liquid splashes Replacement Tip 17 mm replacement tip available upon request
Applications	Commercial dairy farms Beef cattle breeding farms Professional calf-rearing centers Replacement-heifer facilities Maternity and calf-treatment areas Veterinary livestock-management programs Steel-structure cattle barns Large livestock farm projects Professional cattle-care equipment packages
Customization Options	Transformer input specification Regional mains plug configuration Heating-tip diameter Replacement heating-tip kits Operating cable length Heat-resistant resting stand Protective carrying case available upon request Spare-parts package available upon request Retail or distributor packaging Customizable according to project requirements
Installation & Maintenance	No permanent livestock-building installation is normally required. The transformer should be positioned securely and connected only to a compatible electrical supply. Although the reference transformer is IP68 rated, the heated handpiece must be protected from rain, excessive humidity and liquid splashes. The equipment should be operated under shelter in accordance with the supplied instructions. Before use, inspect the cable, transformer, handle, heating shaft and tip for visible damage. A damaged electrical cable or handpiece should not be used. Always disconnect the equipment and allow the metal components to cool completely before maintenance. Liquid should not be used to clean the heated handpiece. Residue on a cooled tip can be removed using an appropriate dry brush. The equipment is intended for professional use by trained adults. Calf restraint, pain management, anesthesia or analgesia, treatment timing and aftercare should comply with veterinary recommendations and applicable animal-welfare regulations.
Product FAQ	Q: Is the complete dehorner waterproof? A: No. The referenced transformer is rated IP68, but the heated handpiece itself must be protected from rain, humidity and liquid splashes. Q: What voltage reaches the handpiece? A: The transformer supplies a low-voltage 24V output to the dehorning handpiece. Q: How quickly does the unit heat up? A: The referenced system reaches operating temperature in less than five minutes. Q: What temperature can the tip reach? A: The reference heating tip reaches more than 600°C. Q: What size heating tip is supplied? A: The standard reference configuration uses a 17mm tip. Q: Can the heating tip be replaced? A: Yes. A compatible 17mm replacement tip can be supplied separately. Q: Can the equipment be used outside? A: The handpiece should be used only in sheltered conditions and protected from rain and moisture even though the transformer has a high ingress-protection rating. Q: Who should operate an electric calf dehorner? A: The equipment should only be used by appropriately trained and authorized personnel following veterinary guidance and applicable animal-welfare requirements.
Product Gallery