Adjustable Sheep Head Restraint Stand

• Designed for temporary head and neck restraint of sheep.
• Hot-dip galvanized steel tubing provides corrosion resistance.
• Standard and heavy-duty frame options are available.
• Adjustable screw structure accommodates different sheep sizes.
• Reinforced oval head frame provides stable positioning.
• Wide tubular base improves stability during routine handling.
• Compact and lightweight structure is convenient to move and store.
• Reusable design requires no electricity or hydraulic system.
• Suitable for sheep farms, breeding centers and veterinary applications.

• Product Name: Adjustable Sheep Head Restraint Stand
• Product Type: Sheep Head and Neck Restraint Frame
• Available Versions: Standard / Heavy-Duty
• Standard Frame Tube: Nominal 1/2 in Hot-Dip Galvanized Tube
• Heavy-Duty Frame Tube: Nominal 3/4 in Hot-Dip Galvanized Tube
• Standard Wall Thickness: Approximately 1.0 mm
• Heavy-Duty Wall Thickness: Approximately 1.5 mm
• Standard Version Weight: Approximately 1.7 kg
• Heavy-Duty Version Weight: Approximately 2.4 kg
• Illustrated Head Frame Inner Width: Approximately 12 cm
• Illustrated Head Frame Outer Width: Approximately 17 cm
• Adjustment: Manual Screw Adjustment
• Surface Treatment: Hot-Dip Galvanized
• Operation: Manual
• Animal Application: Sheep and Compatible Small Ruminants

The nominal 1/2 in and 3/4 in tube descriptions correspond to the listed 4-fen and 6-fen pipe specifications. Exact overall dimensions, adjustment range and rope specification should be confirmed before ordering.

• Routine sheep handling and temporary restraint.
• Veterinary examination and health checks.
• Vaccination and injection assistance.
• Ear tagging and identification procedures.
• Oral dosing and drenching assistance.
• Hoof-care and grooming procedures.
• Sheep breeding and reproductive management.
• Commercial sheep farms and veterinary service operations.

• Place the stand on firm, level and non-slip ground before use.
• Inspect the frame, welds, adjustment screws and securing rope regularly.
• Adjust the restraint opening according to the animal's size.
• Avoid excessive tightening around the head or neck.
• Keep the animal under observation throughout the restraint period.
• Remove manure, dirt and veterinary residues after use.
• Dry the frame thoroughly after washing.
• Lubricate adjustable threaded components when required.
• Repair or replace damaged components before further use.

Q: What is this sheep restraint stand used for?
A: It is designed to temporarily stabilize the head and neck of sheep during routine handling, examination and farm management procedures.

Q: What versions are available?
A: Standard and heavy-duty versions are available.

Q: What is the difference between the two versions?
A: The standard version uses approximately 1.0 mm wall tubing and weighs about 1.7 kg, while the heavy-duty version uses approximately 1.5 mm wall tubing and weighs about 2.4 kg.

Q: Is the frame galvanized?
A: Yes. The listed frame material is hot-dip galvanized steel tubing for improved corrosion resistance.

Q: Can the restraint size be adjusted?
A: Yes. Manual screw adjustments allow the frame configuration to be adapted for different sheep sizes.

Q: What is the approximate head-frame opening?
A: The illustrated reinforced head frame has an inner width of approximately 12 cm and an outer width of approximately 17 cm.

Q: Can it be used for goats?
A: It may be suitable for compatible goats or other small ruminants when the animal fits the available adjustment range and can be restrained safely.

Q: How should the stand be maintained?
A: Keep the frame clean and dry, inspect welds and adjustment hardware regularly, and replace damaged ropes or structural components before further use.