Product Name	Professional Portable EC/TDS Analyzer
Product Image
Product Overview	The Professional Portable EC/TDS Analyzer is a high-range handheld water quality instrument designed to measure electrical conductivity, total dissolved solids and temperature. A rugged IP67-rated body, replaceable two-ring probe and integrated temperature sensor provide a practical solution for field inspection. The analyzer is well suited to commercial livestock water systems, agricultural water management and farm engineering applications. It can support routine comparison of water conditions at wells, treatment units, storage tanks, building inlets and livestock drinking-line endpoints.
Key Features	• High-range EC measurement from 0.00 to 20.00 mS/cm. • TDS measurement from 0.00 to 10.00 ppt (g/L). • Separate EC and TDS measurement modes. • Integrated temperature measurement and automatic temperature compensation. • Adjustable TDS conversion factor from 0.45 to 1.00. • Adjustable temperature compensation coefficient from 0.0 to 2.4%/°C. • IP67-rated waterproof and dust-resistant meter housing. • Two-ring graphite probe designed for high-range EC/TDS measurement. • Replaceable probe supports long-term service and maintenance. • Built-in temperature sensor provides temperature-compensated readings. • Large multi-level LCD displays measurement information and operating guidance. • Stability indicator helps identify when readings have stabilized. • Automatic one-point EC/TDS calibration. • Battery Error Prevention System helps prevent unreliable readings caused by low batteries. • Selectable automatic shut-off at 8 or 60 minutes, or continuous operation.
Structural Components	The analyzer consists of an IP67 handheld meter body, multi-level LCD, dual control buttons, bottom-mounted probe connection, replaceable two-ring EC/TDS probe, integrated temperature sensor and flexible probe cable. The two-ring graphite sensing probe is designed for high-range conductivity and TDS measurement. Its construction helps resist clogging and allows convenient cleaning during routine field service. The probe incorporates a temperature sensor so EC and TDS measurements can be automatically compensated for sample temperature. The bottom probe connection keeps the cable away from the main operating area and supports comfortable handheld testing. The referenced configuration uses a DIN-type probe connection and a 1 m cable. Final configuration is available according to project requirements.
Working Principle / Structural Principle	Electrical conductivity (EC) indicates the ability of a water sample to conduct electrical current, which is influenced by dissolved ionic substances. The probe measures the conductivity response and the analyzer displays the EC value within the specified range. TDS is derived from conductivity using a selectable conversion factor. The referenced configuration allows the factor to be adjusted from 0.45 to 1.00 in 0.01 increments, allowing the measurement setup to be matched to different solution characteristics. The integrated temperature sensor measures sample temperature while the analyzer automatically compensates EC and TDS readings. The temperature compensation coefficient can be adjusted from 0.0 to 2.4%/°C.
Technical Specifications	Measurement Parameters: EC, TDS and Temperature EC Range: 0.00 to 20.00 mS/cm EC Resolution: 0.01 mS/cm EC Accuracy at 25°C: ±2% F.S. EC Calibration: Automatic, one-point at 12.88 mS/cm TDS Range: 0.00 to 10.00 ppt TDS Resolution: 0.01 ppt (g/L) TDS Accuracy at 25°C: ±2% F.S. TDS Conversion Factor: Selectable from 0.45 to 1.00 in 0.01 increments TDS Calibration: Automatic one-point at 6.44 ppt with CONV 0.5 or 9.02 ppt with CONV 0.7 Temperature Range: -5.0 to 105.0°C / 23.0 to 221.0°F Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy at 25°C: ±0.5°C / ±1.0°F Temperature Compensation: Automatic; coefficient selectable from 0.0 to 2.4%/°C Probe: Two-ring EC/TDS/temperature sensor with DIN connector and 1 m cable Power Supply: 1.5V AAA batteries, 3 pcs. Continuous Operating Time: Approximately 500 hours Auto Shut-Off: Selectable at 8 minutes, 60 minutes or disabled Operating Environment: 0 to 50°C / 32 to 122°F; maximum relative humidity 100% Ingress Protection: IP67 Dimensions: 154 × 63 × 30 mm Weight: Approximately 196 g with batteries Final product configuration, packaging and accessory requirements are available upon request and according to project requirements.
Applications	• Commercial pig farms and integrated livestock production facilities • Livestock drinking-water quality inspection • Poultry and animal breeding operations • Farm water treatment and filtration systems • Groundwater and farm water-source inspection • Water storage tanks and distribution networks • Livestock drinking-line commissioning and maintenance • Agricultural water supply and irrigation systems • Water conditioning and treatment process checks • Pig farm construction and facility commissioning • Agricultural engineering contractors and livestock equipment service teams • Multi-site livestock project inspection and maintenance • Distributor and agricultural project procurement applications
Customization Options	The analyzer can be incorporated into water-quality inspection packages for livestock groups, farm engineering companies, agricultural contractors, distributors and project procurement teams. • Supply quantities according to project requirements • Replacement EC/TDS/temperature probes available upon request • Calibration standards and testing accessories available upon request • Distributor and agency procurement arrangements • Bulk supply for multi-house and multi-farm livestock projects • Packaging and accessory configurations according to project requirements • Solutions designed according to local climate and farm conditions
Installation & Maintenance	No permanent installation is required. Connect the probe securely to the meter, rinse the sensing area with clean or deionized water and immerse the probe into a representative water sample. Keep the two-ring sensing area away from the container wall and bottom. Gently move the probe through the sample and wait for the stability indication before recording the EC, TDS or temperature reading. Calibrate the instrument regularly using the appropriate EC or TDS calibration standard. The referenced configuration supports automatic one-point calibration at 12.88 mS/cm, or direct TDS calibration at applicable standards depending on the selected conversion factor. Rinse the probe after testing and between different samples to minimize cross-contamination. Inspect and clean the sensing rings regularly when the instrument is used in water containing suspended matter or mineral deposits. The replaceable probe design simplifies maintenance for long-term commercial use. Store the meter and probe according to the applicable equipment and electrode storage requirements.
Project Cases	The Professional Portable EC/TDS Analyzer can be used as part of water-quality inspection procedures during commercial pig farm construction, livestock facility upgrades and agricultural water system commissioning. During project commissioning, engineering personnel can compare EC and TDS values at the water source, filtration or treatment outlet, storage tank, building inlet and drinking-line endpoint. Temperature readings provide additional information when comparing samples collected under different conditions. For large livestock projects involving multiple production houses, the analyzer can support standardized field testing by maintenance and quality-control teams. Additional meters, replacement probes and calibration supplies are available according to project requirements.
Product FAQ	Q: What does the Professional Portable EC/TDS Analyzer measure? A: It measures electrical conductivity, total dissolved solids and temperature using a dedicated EC/TDS probe with an integrated temperature sensor. Q: What is the EC measurement range? A: The referenced configuration measures from 0.00 to 20.00 mS/cm with 0.01 mS/cm resolution. Q: What is the TDS measurement range? A: The referenced configuration measures from 0.00 to 10.00 ppt (g/L) with 0.01 ppt resolution. Q: Can the analyzer be used for livestock drinking-water inspection? A: Yes. It is suitable for comparative EC and TDS testing at livestock water sources, treatment systems, storage tanks and drinking-water distribution points. Q: Can the TDS conversion factor be adjusted? A: Yes. The referenced configuration provides a selectable conversion factor from 0.45 to 1.00 in 0.01 increments. Q: Does the analyzer compensate for temperature? A: Yes. Automatic temperature compensation is available, with an adjustable coefficient from 0.0 to 2.4%/°C. Q: Is the probe replaceable? A: Yes. The referenced HI763063-type EC/TDS/temperature probe is replaceable, supporting long-term maintenance and service. Q: Is the meter waterproof? A: The referenced configuration has an IP67-rated casing designed to provide protection against dust and water intrusion. Q: Does the instrument require permanent installation? A: No. It is a portable handheld analyzer intended for field water-quality testing. Q: Can the product be supplied for large agricultural projects? A: Yes. Quantities, replacement probes, calibration standards and accessory packages are available according to project requirements.
Product Gallery