Mobile ULV Cold Fog Disinfection Machine

• Vehicle-Mounted Mobile Platform: Designed for large-area operations where high mobility and extended coverage are required.
• ULV Cold Fogging: Produces fine droplets without thermal heating for controlled liquid distribution.
• 75 L Solution Tank: The reference configuration provides a high-capacity tank for extended spraying operations.
• Adjustable Flow Rate: Maximum liquid flow is up to 1000 mL/min in the reference configuration.
• Long Spray Reach: A windless spray distance of at least 20 m is specified for the reference model.
• Directional Nozzle Control: Vertical spray adjustment from 0° to 60° and horizontal adjustment of ±90° support flexible targeting.
• Remote Operation: Remote-control functions allow machine movement and spraying to be managed from a safer operating position.
• Battery Powered: A 200 Ah battery is used in the reference configuration for mobile operation.
• Large-Area Productivity: Reference working performance is up to approximately 100,000 m²/h under specified operating conditions.
• Reduced Operator Exposure: Remote operation can help keep personnel farther away from the treatment area during spraying.

• Mobile Chassis: Supports the fogging equipment and provides vehicle-based mobility for large-area operations.
• Solution Tank: Stores the prepared treatment solution and supplies liquid to the atomization system.
• ULV Atomization Assembly: Converts the liquid into a fine aerosol suitable for controlled space treatment.
• Directional Spray Nozzle: Provides adjustable vertical and horizontal spray positioning.
• Blower / Air Delivery System: Generates the airflow required to transport atomized droplets over the target area.
• Liquid Delivery System: Includes the pump, lines and control components required to deliver the solution to the nozzle.
• Battery System: Provides electrical power for the mobile fogging and control functions.
• Remote Control System: Supports remote movement, braking and spraying control according to the selected configuration.
• Control and Monitoring Components: Coordinate machine movement, spraying and operating status.

• Commercial Pig Farms: Large-area environmental disinfection and biosecurity treatment around farm buildings, roads and designated service areas.
• Poultry Farms: Large-scale treatment of poultry farm surroundings and suitable building environments according to the disinfectant protocol.
• Livestock Farm Biosecurity: Mobile treatment of defined high-traffic or high-risk areas as part of a comprehensive farm biosecurity plan.
• Farm Roads and Open Areas: Mobile spraying for large outdoor agricultural sites where vehicle access is available.
• Agricultural Projects: Suitable for selected crop, greenhouse and agricultural environmental spraying applications where the formulation and droplet characteristics are appropriate.
• Veterinary and Quarantine Facilities: Can support controlled environmental treatment programs for large premises.
• Public Health and Sanitation Projects: Suitable for professional large-area applications when operated according to local regulations and approved chemical instructions.
• Engineering and Municipal Projects: Vehicle-mounted configuration supports centralized operation over extensive sites.

• Solution Tank: Capacity can be customized according to required operating duration and vehicle payload.
• Flow Rate: Adjustable according to formulation characteristics, target application and required coverage.
• Nozzle Configuration: Spray outlet design and directional arrangement can be selected according to project requirements.
• Remote Control: Control range, operating interface and machine functions can be configured according to the project specification.
• Vehicle Integration: Mounting structure can be designed according to pickup trucks, utility vehicles or other suitable mobile platforms.
• Electrical System: Battery and control configuration can be designed according to local standards and operating conditions.
• Material Selection: Liquid-contact materials can be selected according to chemical compatibility and local climate conditions.
• OEM / Project Supply: Branding, packaging, spare parts and engineering support are available according to distributor, agent and project requirements.

Installation: The machine is designed for installation on a suitable mobile vehicle platform. The mounting structure should be securely fixed to the vehicle and positioned to maintain adequate clearance, weight distribution and access for operation and maintenance. Electrical connections, battery capacity and vehicle payload should be verified before commissioning.

• Install the unit on a stable vehicle platform capable of supporting the machine's operating weight.
• Secure the fogging assembly and solution tank before transport or operation.
• Check the battery, control system, liquid lines and nozzle before each operation.
• Use only liquids and formulations confirmed to be compatible with the equipment.
• Adjust the flow rate and nozzle direction according to the approved treatment procedure.
• Inspect the atomization nozzle regularly for deposits, blockage or uneven output.
• Flush the solution circuit with clean water when appropriate after chemical treatment.
• Keep the air intake, blower and mechanical components clean and free from obstruction.
• Check battery condition, wiring, connectors and remote-control functions periodically.
• Inspect mounting bolts, chassis components and tank supports regularly, especially after transport over uneven ground.
• Disconnect power before electrical maintenance and follow the equipment service instructions.

Q: What is a mobile ULV cold fogger?
A: It is a mobile large-area fogging machine that atomizes liquid into fine droplets without thermal heating and distributes the mist through a directional spray system.

Q: What is the solution tank capacity?
A: The reference configuration has a 75 L solution tank. Other capacities can be customized according to vehicle payload and project requirements.

Q: What is the maximum flow rate?
A: The reference configuration has a maximum flow rate of up to 1000 mL/min. Actual operating flow should be selected according to the application and formulation.

Q: How far can the machine spray?
A: The reference specification provides a windless spray distance of at least 20 m. Actual field coverage varies with wind, terrain, droplet characteristics and operating conditions.

Q: Can the spray direction be adjusted?
A: Yes. The reference configuration provides 0°–60° vertical adjustment and ±90° horizontal adjustment.

Q: Is the machine suitable for pig and poultry farms?
A: Yes. It is designed for large-area environmental treatment in commercial livestock and poultry projects, subject to the application requirements of the selected disinfectant or treatment product.

Q: Does the machine use thermal fogging?
A: No. It uses ULV cold fogging technology and does not rely on thermal heating to generate the spray.

Q: Can it be integrated with a pickup truck or utility vehicle?
A: The reference design is vehicle-mounted. Mounting dimensions, load capacity and vehicle integration should be confirmed according to the selected vehicle and project requirements.

Q: Can the machine be remotely controlled?
A: Yes. The reference configuration includes remote-control functions for mobile operation and spraying control. The exact control range and functions depend on the selected configuration.

Q: Can the machine be customized for international projects?
A: Yes. Tank capacity, flow control, nozzle arrangement, vehicle mounting, battery configuration, control functions, materials and packaging can be customized according to project requirements.