Electric Powder Sprayer for Livestock Farms

• Portable handheld electric blower unit
• Self-suction dry powder delivery system
• Long directional discharge nozzle
• Flexible powder suction hose
• Integrated carrying handle
• Variable airflow control for different application requirements

• 1200 W Electric Motor: Provides strong airflow for efficient dry-powder distribution.
• 2.2 m³/min Airflow: High-volume air movement helps mix and transport powder through the discharge nozzle.
• 15,000 rpm No-Load Speed: High-speed blower operation supports rapid powder application.
• 6–8 m Spraying Distance: Extended reach allows operators to treat larger areas while reducing frequent repositioning.
• Self-Suction Powder Feeding: Powder is drawn into the airflow automatically without complex feeding equipment.
• Variable Airflow Control: Air output can be adjusted according to powder characteristics and application conditions.
• Copper Motor: Designed for stable operation and reliable performance during routine farm use.
• Lightweight Portable Design: Integrated handle and compact structure make the machine easy to carry between livestock buildings.
• Uniform Powder Distribution: Dry powder and airflow are mixed before discharge to help improve application consistency.

• Pig house dry-powder application
• Poultry house powder distribution
• Livestock pen and bedding treatment
• Compatible lime powder spreading
• Compatible dry disinfectant powder application
• Farm aisle and floor treatment
• Breeding and quarantine facilities
• Agricultural dry-powder application
• General livestock biosecurity support work

• Check that the power supply matches the machine configuration before operation.
• Connect the powder suction hose securely and place its inlet into the compatible dry powder.
• Start with a lower airflow setting and increase gradually until the required distribution pattern is achieved.
• Keep the powder dry and free-flowing to reduce clogging in the suction hose and nozzle.
• Do not allow large particles, foreign objects or wet material to enter the machine.
• Clean residual powder from the hose, air passage and nozzle after use.
• Keep motor ventilation openings clean to ensure adequate cooling.
• Disconnect the power supply before cleaning, inspection or maintenance.
• Wear appropriate respiratory, eye and skin protection according to the powder manufacturer's safety instructions.
• Store the machine in a clean, dry environment when not in use.

Q: What is the rated power of the electric powder sprayer?
A: The specified rated power is 1200 W.

Q: What is the maximum spraying distance?
A: The listed spraying distance is approximately 6–8 m under suitable operating conditions.

Q: How does the powder enter the machine?
A: The machine uses a self-suction system that draws compatible dry powder into the airflow through the suction hose.

Q: Can the airflow be adjusted?
A: Yes. The machine provides variable airflow control to suit different powder types and distribution requirements.

Q: Is it suitable for livestock farms?
A: Yes. It can be used for compatible dry-powder application in pig houses, poultry houses, livestock pens and other agricultural facilities.

Q: Can lime powder be applied?
A: Suitable free-flowing dry lime powder may be applied when its particle size and material characteristics are compatible with the machine.

Q: Can wet powder be used?
A: No. Damp or agglomerated material may block the suction hose and discharge system. The powder should remain dry and free-flowing.

Q: What safety precautions are recommended?
A: Use only approved compatible powders and follow the material manufacturer's instructions for respiratory protection, eye protection, ventilation and safe handling.