Product Name

Portable Veterinary Micro Centrifuge

Product Image

Product Overview

The Portable Veterinary Micro Centrifuge is a compact benchtop centrifugation solution for small-volume sample processing in veterinary laboratories, animal health facilities and livestock diagnostic workstations. Its lightweight construction and compact footprint make it practical where laboratory bench space is limited or equipment needs to be relocated between workstations.

The centrifuge uses a brushless motor designed for long service life and reduced routine motor maintenance. A transparent hinged lid provides visibility of the rotor area, while the compact housing supports straightforward placement on laboratory benches.

The product series includes WTL-4K, WTL-6K and WTL-10K configurations, with maximum speeds of 4,000, 6,000 and 10,000 RPM respectively. Maximum RCF is 900 × g, 2,000 × g and 5,000 × g according to the selected configuration.

For commercial pig farms, livestock production groups, veterinary clinics and centralized animal health laboratories, the unit can be integrated into small-volume sample preparation workflows. Model selection, rotor configuration and accessories are Customizable and Available upon request.

Key Features

Compact micro centrifuge format for veterinary and animal health laboratory use.
Lightweight 1.2 kg design supports convenient placement and relocation.
Brushless motor provides long service life with reduced routine motor maintenance.
Low-noise operation at ≤53 dB(A).
Three performance configurations: WTL-4K, WTL-6K and WTL-10K.
Maximum rotational speeds of 4,000, 6,000 or 10,000 RPM depending on configuration.
Maximum centrifugal force of 900 × g, 2,000 × g or 5,000 × g depending on model.
Designed for common 0.2 mL, 0.5 mL and 1.5 mL microtube formats.
WTL-6K configuration supports an additional 2 × 8 × 0.2 mL tube arrangement.
Transparent hinged lid allows visual inspection of the rotor and samples.
Small 160 × 200 × 123 mm footprint minimizes laboratory bench requirements.
AC100–242V power supply supports international laboratory deployment.
Simple construction facilitates routine cleaning and day-to-day laboratory handling.

Structural Components

The Portable Veterinary Micro Centrifuge is built around a compact equipment housing, microtube rotor, brushless motor drive, transparent protective lid, hinged lid mechanism, tube holders and internal electrical control components.

The rotor system is designed for small-volume microcentrifuge tubes. Depending on the selected configuration, the equipment can accommodate 0.2 mL, 0.5 mL and 1.5 mL tubes. The WTL-6K configuration additionally supports an 8-position 0.2 mL tube arrangement.

Main structural elements include:

Compact benchtop housing
Microtube rotor assembly
Brushless motor drive
Transparent safety lid
Hinged lid mechanism
Microtube holders and rotor inserts
Power control interface
Internal drive and electrical components

Rotor and tube-holder configurations can be supplied According to project requirements.

Working Principle / Structural Principle

The centrifuge separates components of liquid samples according to density by applying centrifugal force. Compatible microtubes are positioned in the rotor and arranged in a balanced configuration before centrifugation.

When the brushless motor rotates the rotor at the selected speed, centrifugal force causes denser components of the sample to migrate away from the rotational axis while lighter fractions remain closer to the center. Following completion of the centrifugation cycle, the separated sample can be transferred to the next stage of the laboratory workflow.

The selected WTL-4K, WTL-6K or WTL-10K configuration determines the maximum rotational speed and corresponding centrifugal force. This allows the equipment to be selected according to the requirements of the intended sample preparation procedure.

For veterinary diagnostic workflows, centrifugation speed, duration and sample preparation procedures should follow the validated protocol for the specific test, sample type and laboratory application.

Technical Specifications

Product Type	Portable veterinary micro centrifuge
Model Options	WTL-4K / WTL-6K / WTL-10K
WTL-4K Maximum Speed	4,000 RPM
WTL-4K Maximum RCF	900 × g
WTL-6K Maximum Speed	6,000 RPM
WTL-6K Maximum RCF	2,000 × g
WTL-10K Maximum Speed	10,000 RPM
WTL-10K Maximum RCF	5,000 × g
Sample Capacity	6 × 1.5 mL / 0.5 mL / 0.2 mL tubes, depending on rotor configuration
Additional WTL-6K Capacity	2 × 8 × 0.2 mL tubes
Noise Level	≤53 dB(A)
Power Supply	AC100–242V
Total Power	30 W
Dimensions	160 × 200 × 123 mm
Package Dimensions	205 × 265 × 160 mm
Net Weight	1.2 kg
Motor	Brushless motor
Project Configuration	Customizable / According to project requirements / Available upon request

Applications

Veterinary laboratory sample preparation
Small-volume biological sample separation
Microtube centrifugation
Animal blood sample preparation
Veterinary diagnostic workflows
Livestock health monitoring
Commercial pig farm laboratory workstations
Livestock breeding and production facilities
Veterinary clinics and animal health centers
Decentralized animal health testing stations
Veterinary research and teaching laboratories

The compact format is suitable for facilities processing small-volume samples or requiring an additional centrifuge at a dedicated sample preparation station. In commercial livestock operations, the unit can be positioned within a veterinary laboratory or sample-processing area alongside other diagnostic equipment.

Customization Options

The Portable Veterinary Micro Centrifuge can be specified according to required rotational speed, centrifugal force, tube format and laboratory operating conditions.

Configuration options include selection among WTL-4K, WTL-6K and WTL-10K performance levels, rotor and tube-holder arrangements, compatible microtube formats, electrical requirements, packaging and accessory combinations.

For commercial pig farms, livestock production groups, veterinary laboratories and agricultural engineering projects, equipment selection can be coordinated with laboratory bench layout, sample workflow, electrical infrastructure and procurement quantities.

Project configuration is Customizable, According to project requirements, and Available upon request.

Installation & Maintenance

The centrifuge is designed for simple benchtop installation and does not require permanent mechanical installation. Position the unit on a stable, level and clean laboratory work surface with adequate clearance around the equipment.

Before operation, verify that the rotor and tube holders are correctly installed. Microtubes should be distributed symmetrically and balanced before centrifugation. Only compatible tubes and accessories should be used with the selected rotor configuration.

Keep the transparent lid closed while the rotor is operating and wait until rotation has completely stopped before opening the lid. Do not exceed the specified speed, RCF or sample capacity of the selected model.

Routine maintenance includes cleaning the external housing, rotor and tube holders and inspecting the lid, rotor and sample-contact surfaces for contamination or damage. Biological spills should be handled according to the laboratory's established biosafety and disinfection procedures.

The brushless motor is designed for long service life and reduced routine motor maintenance. Periodic inspection and performance verification should follow the applicable equipment instructions and laboratory quality management procedures.

Project Cases

The Portable Veterinary Micro Centrifuge is suitable for international procurement projects involving commercial pig farms, integrated livestock production groups, veterinary clinics, animal health laboratories, diagnostic service providers and agricultural engineering contractors.

For commercial swine production facilities, the unit can be installed at a veterinary sample-processing workstation for small-volume sample preparation. Its compact dimensions allow it to share laboratory bench space with other diagnostic instruments.

For decentralized livestock health monitoring, the lightweight construction provides practical flexibility for deployment at multiple veterinary workstations or regional animal health facilities.

For new livestock facility construction projects, centrifuge requirements can be incorporated into the laboratory equipment schedule together with laboratory benches, electrical services, sample reception, testing zones and biosecurity workflow. Equipment quantities and accessory combinations are Available upon request.

Product FAQ

Q: What is the Portable Veterinary Micro Centrifuge used for?
A: It is designed for small-volume centrifugation and sample preparation in veterinary laboratories, animal health testing facilities, veterinary clinics and livestock diagnostic workstations.

Q: Which configurations are available?
A: The product series includes WTL-4K, WTL-6K and WTL-10K configurations, with maximum speeds of 4,000, 6,000 and 10,000 RPM respectively.

Q: What is the maximum RCF?
A: Maximum RCF is 900 × g for WTL-4K, 2,000 × g for WTL-6K and 5,000 × g for WTL-10K.

Q: What tube sizes are supported?
A: The standard configuration supports 0.2 mL, 0.5 mL and 1.5 mL microtubes. The WTL-6K configuration additionally supports 2 × 8 × 0.2 mL tubes.

Q: Is it suitable for commercial pig farm laboratories?
A: Yes. Its compact footprint, low-noise operation and small-volume tube compatibility make it suitable for veterinary sample-processing stations within commercial swine and livestock facilities.

Q: Does the centrifuge use a brushless motor?
A: Yes. The product uses a brushless motor designed for long service life, reliable operation and reduced routine motor maintenance.

Q: Is it suitable for international deployment?
A: The specified configuration supports AC100–242V power supply, making it suitable for international laboratory applications subject to local electrical requirements.

Q: Can the equipment be configured for a livestock engineering project?
A: Yes. Model selection, rotor configuration, accessories, packaging and procurement requirements are Customizable, According to project requirements, and Available upon request.

Product Gallery

portable veterinary micro centrifuge open lid

compact veterinary laboratory micro centrifuge

veterinary micro centrifuge accessories and rotor

veterinary micro centrifuge rotor with sample tubes

veterinary centrifuge tube holder operation

portable veterinary centrifuge front and rear view

Portable Veterinary Micro Centrifuge

Multifunction Veterinary Centrifuge

Veterinary Clinical Micro Centrifuge

Portable Veterinary Micro Centrifuge

Comments & Inquiries

Portable Veterinary Micro Centrifuge

Multifunction Veterinary Centrifuge

Veterinary Clinical Micro Centrifuge

Portable Veterinary Micro Centrifuge

Comments & Inquiries

Related Products