Wall-Mounted Fine Mist Disinfection System

• Fine Mist Atomization: Multiple spray heads distribute the prepared solution throughout the personnel passage for broad surface coverage.
• 5- or 10-Head Configurations: Capacity can be selected according to passage dimensions and project requirements.
• Wall-Mounted Structure: Keeps the main equipment outside the walking area and helps maintain clear personnel circulation.
• Modular Layout: Atomizing units can be positioned along the passage according to site dimensions and required coverage.
• Standard and Anti-Freeze Versions: Optional cold-weather configuration supports installations where low-temperature conditions are a concern.
• 6 or 12 L/h Output: Approximate atomization output is available according to the 5-head or 10-head configuration.
• Wide Input Voltage: Designed for a 160–260 V, 50 Hz electrical supply in the reference configuration.
• Low Standby Consumption: Approximate standby power is 4 W or 8 W depending on system configuration.
• Farm Biosecurity Integration: Suitable for incorporation into controlled personnel access and transition procedures.

• Wall-Mounted Atomizing Modules: Individual modules are arranged along the entrance to provide distributed mist application.
• Fine Mist Spray Heads: Generate the mist used for personnel and protective-clothing treatment.
• Liquid Supply Lines: Interconnected tubing delivers the prepared solution to each atomizing unit.
• Liquid Connection Assembly: Provides the interface between the supply line and individual spray modules.
• Wall Support Structure: Secures the modules to a suitable wall or structural mounting surface.
• Electrical Control Components: Supply and control the atomization system according to the selected configuration.
• Optional Anti-Freeze Components: Available for installations exposed to lower ambient temperatures.
• Modular Pipe Layout: The distribution arrangement can be planned according to passage width, length and access configuration.

• Commercial pig farm personnel entrances
• Poultry farm biosecurity passages
• Cattle and dairy farm access points
• Breeding center controlled entrances
• Veterinary and quarantine facilities
• Farm changing-room exits and biosecurity transition zones
• Feed mill and agricultural facility entrances
• Commercial livestock farm personnel hygiene systems
• New pig farm construction and biosecurity infrastructure projects
• Farm renovation and upgrade projects requiring space-efficient personnel disinfection equipment

• Spray Head Quantity: 5 or 10 heads, with other project configurations available upon request.
• Head Spacing: Adjustable according to passage length, width, height and required mist distribution.
• Anti-Freeze Configuration: Available for installations exposed to low-temperature operating conditions.
• Passage Layout: Module arrangement can be designed according to the farm's architectural and biosecurity layout.
• Electrical Configuration: Available according to destination-market standards and project requirements.
• OEM Supply: Product labeling, packaging and procurement quantities can be discussed for distributors, agents and engineering companies.
• Project Integration: The system can be specified together with personnel hygiene, vehicle disinfection and other livestock biosecurity equipment.

Installation: Determine the number and position of atomizing modules according to passage width, height, length and required coverage. Secure all wall-mounted components to a suitable structural surface and arrange the liquid lines so that they are protected from impact and do not obstruct personnel movement.

• Confirm that the electrical supply is compatible with the selected system configuration before commissioning.
• Use only disinfectants and liquids confirmed to be compatible with the equipment.
• Prepare disinfectant solutions strictly according to the chemical manufacturer's dilution instructions.
• Inspect spray heads regularly and clean them if atomization becomes uneven or restricted.
• Flush liquid lines with clean water when required to reduce chemical deposits and blockage.
• Inspect tubing, fittings, electrical connections and wall mounting points periodically.
• Check the anti-freeze system where applicable before operation in low-temperature conditions.
• Keep the passage floor and access route free from loose tubing, tools and maintenance materials.
• Switch off electrical power before servicing, cleaning or dismantling components.
• Replace worn or damaged components according to the maintenance schedule and operating conditions.

Q: What configurations are available?
A: The standard configurations use 5 or 10 spray heads. The system can also be configured according to passage dimensions and project requirements.

Q: What is the atomization output?
A: The 5-head configuration provides approximately 6 L/h, while the 10-head configuration provides approximately 12 L/h.

Q: What electrical supply does the system require?
A: The reference configuration is designed for a 160–260 V, 50 Hz electrical supply. Destination-market configurations can be discussed according to project requirements.

Q: Is an anti-freeze version available?
A: Yes. Both 5-head and 10-head configurations can be supplied in anti-freeze versions for appropriate low-temperature installation conditions.

Q: Where is this system normally installed?
A: It is intended for controlled personnel entrances, farm biosecurity passages, changing-room transition zones, veterinary facilities and other defined access-control areas.

Q: Why use a wall-mounted design?
A: Wall mounting keeps the equipment away from the main walking path, reduces floor-space requirements and provides a clean layout for fixed personnel biosecurity entrances.

Q: Can the system be customized for different passage sizes?
A: Yes. The number, spacing and layout of atomizing modules can be selected according to passage dimensions, farm layout and project requirements.

Q: Can any disinfectant be used?
A: No. Only compatible disinfectants approved for the intended application should be used, at the concentration and exposure conditions specified by the chemical manufacturer.