Wujiabao Fine Mist Fogger for Livestock Farms

• Compact air-driven fine mist atomizer
• Polypropylene main body
• 316 stainless steel nozzle components
• Integrated pressure regulator
• Single-nozzle and multi-nozzle configurations
• Suitable for suspended or fixed livestock-house installation

• Fine Mist Atomization: Produces small, evenly distributed droplets for efficient environmental treatment.
• Cooling & Humidification: Fine water droplets absorb heat during evaporation and help increase indoor relative humidity.
• Dust Suppression: Suspended droplets help capture airborne dust particles in livestock and agricultural environments.
• Wide Spray Coverage: Spray diameter can reach approximately 6 m under suitable operating conditions.
• 80–100 m² Coverage: One unit can serve a relatively large humidification area depending on installation height, airflow and environmental conditions.
• Corrosion-Resistant Materials: PP body and 316 stainless steel nozzle components support use in humid farm environments.
• Adjustable Pressure: Integrated regulator allows mist performance to be adjusted according to system requirements.
• Multiple Nozzle Options: Available in single-nozzle and multi-nozzle configurations for different coverage requirements.
• Compact Lightweight Design: Low unit weight simplifies suspended or fixed installation inside livestock buildings.

• Pig house cooling and humidification
• Poultry house environmental control
• Livestock building dust suppression
• Farrowing and nursery house humidity management
• Cattle and dairy barn cooling
• Hatchery and breeding facility humidification
• Greenhouse and agricultural humidification
• Compatible farm spraying applications
• Industrial and agricultural environmental control

• Install the fogger at an appropriate height according to livestock-house dimensions and required coverage.
• Connect the compressed-air and liquid supply lines securely before operation.
• Adjust operating pressure gradually until the required mist pattern is achieved.
• Arrange multiple units evenly when treating large livestock houses.
• Use clean water or properly filtered compatible liquid to reduce nozzle blockage.
• Inspect the 0.5 mm nozzle opening regularly and clean deposits when necessary.
• Flush the system with clean water after using compatible treatment solutions.
• Check air tubing, liquid tubing, fittings and pressure regulator periodically.
• Protect the system from freezing when installed in low-temperature environments.
• Follow the chemical manufacturer's instructions when any approved treatment solution is used.

Q: What are the main functions of the Wujiabao Fine Mist Fogger?
A: It is mainly used for livestock-house cooling, humidification, dust suppression and compatible fine-mist spraying applications.

Q: What area can one unit cover?
A: The listed humidification area is approximately 80–100 m², although actual coverage depends on installation height, ventilation and environmental conditions.

Q: What is the spray diameter?
A: The specified spray diameter is approximately 6 m under suitable operating conditions.

Q: What materials are used?
A: The main body is polypropylene, while the nozzle components are made from 316 stainless steel.

Q: Does the unit require electricity?
A: The atomizer itself is driven by compressed air. An external air compressor and suitable liquid supply system are required.

Q: Can the mist output be adjusted?
A: Yes. The integrated pressure regulator allows the atomization performance to be adjusted according to system conditions.

Q: Can multiple units be installed in one livestock house?
A: Yes. Multiple foggers can be distributed throughout a building according to floor area, ventilation pattern and required environmental control capacity.

Q: How can nozzle blockage be reduced?
A: Use clean or properly filtered liquid, inspect the nozzle regularly and flush the system after applications that may leave deposits.