Product Name	Medium Bevel Sheep Shearing Comb
Product Image
Product Overview	The Medium Bevel Sheep Shearing Comb is a professional cutting component developed for efficient entry into tight and dense fleece. Its balanced bevel geometry provides a practical combination of wool entry, control and cutting speed, making it particularly suitable for early-season shearing and demanding crossbred fleece conditions. The reference configuration uses a 94 mm working width and a 4 mm medium bevel. A run-in thickness profile reduces the preparation normally required before professional use, while slender teeth promote efficient movement through the fleece. Installed on a compatible goat-farming-equipment/" target="_blank" class="keylink">sheep shearing handpiece and used with a suitable reciprocating cutter, the comb supports commercial wool harvesting, flock management and professional livestock shearing operations.
Key Features	Medium Bevel Geometry: Balanced tooth entry characteristics for tight, dense and early-season fleece. 94 mm Working Width: Professional reference width provides efficient wool coverage while maintaining operator control. 4 mm Bevel: Reference bevel profile provides a practical balance between penetration and smooth comb movement. Run-In Thickness: Designed for professional use with reduced initial preparation compared with traditional full-thickness combs. Slender Tooth Profile: Supports faster movement through wool and reduces unnecessary resistance. Slim Rider Teeth: Outer tooth geometry promotes smooth entry and stable movement across the sheep. Refined Heel Shape: Supports a wider cutter-throw setting when correctly matched with the handpiece. Replaceable Cutting Component: Can be sharpened, maintained and replaced separately from the shearing handpiece. Professional Farm Application: Suitable for repeated seasonal shearing in commercial sheep operations.
Structural Components	Comb Body: Rigid metal body maintains alignment with the shearing handpiece. Precision Teeth: Guide wool fibers toward the cutter during each shearing pass. Medium Bevel: Ground tooth profile influences penetration, wool flow and operator control. Rider Teeth: Outer teeth help stabilize the comb as it travels across the animal. Heel Section: Rear profile supports mounting and appropriate cutter positioning. Mounting Slots: Secure the comb to compatible professional shearing handpieces. Cutting Face: Precision-ground surface provides the working interface for the reciprocating cutter.
Working Principle	The comb is secured to the shearing handpiece beneath a compatible cutter. During operation, the handpiece drive causes the cutter to move rapidly from side to side across the stationary comb. As the operator advances the handpiece through the fleece, the tapered comb teeth separate and guide wool fibers toward the cutting zone. The cutter then shears the wool against the comb surface. Medium-bevel geometry provides a balanced entry profile for dense fleece, while correct cutter throw, blade tension, sharpening and lubrication help maintain smooth operation and an even shearing finish.
Technical Specifications	Product Type Medium bevel sheep shearing comb Reference Width 94 mm Reference Bevel 4 mm medium bevel Comb Thickness Run-in thickness Tooth Profile Slender professional shearing profile Rider Teeth Slim profile for smoother entry Recommended Fleece Tight, dense wool and early-season shearing conditions Primary Application Professional sheep shearing Compatible Cutter According to selected handpiece and cutter configuration Handpiece Compatibility Compatible professional shearing handpieces according to mounting specification Sharpening Regrindable using professional shearing comb grinding equipment Packaging Individual or multi-piece packaging available upon request
Applications	Commercial sheep shearing Early-season flock shearing Dense and tight crossbred fleece Professional shearing sheds Seasonal wool harvesting Sheep breeding farms Livestock shearing contractors Wool production operations Agricultural service companies Shearing equipment distributors
Customization Options	SHEWUYOU can supply shearing comb configurations according to wool type, sheep breed, shearing season, handpiece specification and distributor requirements. Available options can include working width, bevel profile, comb thickness, compatible cutter sets, replacement quantities and complete shearing blade packages. Individual packaging, bulk distributor packs, spare cutter combinations and OEM packaging are available upon request.
Installation & Maintenance	Disconnect the shearing machine from its power source before installing or adjusting the comb. Position the comb squarely on the handpiece and tighten the mounting fasteners evenly. The cutter should be centered correctly over the comb and adjusted to the appropriate throw according to the handpiece specification. Correct blade tension is essential because excessive tension can increase friction and heat, while insufficient tension can reduce cutting efficiency. Apply suitable shearing lubricant regularly during operation. After each working session, remove wool fibers, grease and contamination from the cutting surfaces. Dry the comb thoroughly and apply a light protective oil before storage. When cutting performance declines, the comb should be reground using suitable professional sharpening equipment. Incorrect grinding angles can negatively affect fleece entry and cutting performance.
Project Cases	Medium bevel sheep shearing combs can be supplied as replacement wear parts or incorporated into complete shearing equipment packages for commercial farms, breeding operations and professional shearing contractors. Typical equipment packages can include electric or shaft-driven shearing machines, handpieces, matching cutters, multiple comb profiles, blade oil, grinding equipment and maintenance accessories.
Product FAQ	Q: What is a medium bevel shearing comb used for? A: A medium bevel provides balanced fleece entry and control and is commonly selected for general professional shearing and tighter wool conditions. Q: What is the reference width of this comb? A: The reference professional configuration is 94 mm wide. Q: What is the reference bevel length? A: The reference configuration uses a 4 mm bevel. Q: What does run-in thickness mean? A: A run-in comb has a working thickness designed to reduce the amount of initial grinding or preparation normally required before professional use. Q: Is it suitable for dense wool? A: Yes. The medium-bevel reference configuration is particularly suitable for smoother entry into tight and dense fleece. Q: Can the comb be sharpened? A: Yes. Professional shearing combs can be reground using suitable comb-grinding equipment when the cutting surface becomes dull. Q: Can matching cutters be supplied? A: Yes. Compatible cutter sets can be supplied according to the selected handpiece and shearing configuration.
Product Gallery