Product Name	Wide Sheep Shearing Comb
Product Image
Product Overview	The Wide Sheep Shearing Comb is designed for professional and high-throughput goat-farming-equipment/" target="_blank" class="keylink">sheep shearing where a broad cutting path and smooth fleece entry are required. A 96 mm working width allows the shearer to cover a relatively large surface area with each blow, helping improve productivity when working with suitable crossbred and open-wool sheep. The reference professional configuration uses a 3 mm short bevel and run-in thickness. The short bevel is particularly suitable for good-combing, open wool conditions, while the wide profile supports efficient fleece removal during commercial shearing operations. A slender tooth profile, slim rider teeth and refined heel geometry help improve entry into the fleece, maintain comb flow across the animal and provide adequate adjustment range for cutter throw. The comb is designed to work with a compatible cutter and professional shearing handpiece.
Key Features	96 mm Wide Cutting Profile: Provides broad coverage for efficient fleece removal during professional sheep shearing. 3 mm Short Bevel: Optimized for good-combing sheep and open wool conditions. Run-In Thickness: Designed for professional use with minimal preparation before installation. Slender Tooth Geometry: Helps improve fleece penetration and shearing speed. Slim Rider Teeth: Promote smoother entry and controlled movement across the sheep. Refined Heel Geometry: Provides additional adjustment space for correct cutter throw. Professional Shearing Application: Suitable for commercial farms, shearing sheds and professional livestock contractors. Replaceable Wear Component: Can be removed for sharpening, cleaning or replacement without replacing the complete handpiece. Compatible Blade System: Works with a suitable reciprocating cutter as part of a complete sheep shearing head.
Structural Components	Comb Body: Main steel structure supporting the cutting teeth and mounting section. Comb Teeth: Guide and separate wool before it reaches the moving cutter. Short Bevel: Ground front profile designed for rapid entry into suitable open fleece. Rider Teeth: Outer teeth help stabilize comb movement and support smooth travel over the animal. Heel Section: Supports positioning and correct interaction with the cutter. Mounting Slots: Allow the comb to be secured to a compatible professional handpiece. Cutting Surface: Precision-finished upper surface where the reciprocating cutter passes across the comb.
Working Principle	The comb is mounted to the lower section of a professional sheep shearing handpiece. A cutter is installed above the comb and moves rapidly from side to side during operation. As the handpiece moves through the fleece, the wide comb separates and guides wool between its teeth. The reciprocating cutter then shears the wool fibers against the comb surface. The 96 mm width provides a broad working path, while the short bevel supports fast entry into suitable open and good-combing fleece. Correct lead, cutter throw and blade tension are important for efficient operation. The cutter should move evenly across the comb while maintaining the specified relationship between the cutter tips and comb face.
Technical Specifications	Product Type Wide professional sheep shearing comb Reference Width 96 mm Reference Bevel 3 mm short bevel Thickness Configuration Run-in thickness Comb Material Professional shearing steel Tooth Profile Slender professional shearing profile Primary Fleece Type Good-combing crossbred and open wool sheep Compatible Cutter According to handpiece and shearing system requirements Reference Handpiece Compatibility Skorpion, Outback and Fusion-type compatible systems Sharpening Professional regrinding supported Packaging Individual, multi-pack or according to project requirements OEM Configuration Available upon request
Applications	Commercial sheep shearing Crossbred sheep shearing Open-wool sheep Seasonal wool harvesting Professional shearing sheds Livestock shearing contractors Large sheep breeding farms Wool production operations Shearing equipment distributors Replacement comb and cutter programs
Customization Options	SHEWUYOU can supply wide sheep shearing combs according to fleece type, handpiece configuration, commercial shearing requirements and distributor specifications. Available options can include working width, bevel length, comb thickness, compatible cutter, comb-and-cutter kits, replacement quantities and packaging configuration. Short-, medium- and long-bevel combs can be selected according to wool type and shearing conditions. Distributor packs, spare-part kits and OEM packaging are available upon request.
Installation & Maintenance	Disconnect the shearing machine from its power source before fitting or removing the comb. Position the comb squarely on the handpiece and lightly tighten the mounting screws before installing the cutter. Set the cutter lead and throw according to the handpiece requirements. For the reference professional setup, the cutter should move evenly across the comb and overlap both sides consistently. Correct blade tension should then be applied before operation. Apply suitable shearing oil frequently during use to reduce friction and heat. After shearing, remove wool fibers and contamination from the comb and cutter, dry all metal surfaces and apply a light protective oil before storage. When cutting performance decreases, the comb should be professionally reground on suitable shearing-comb grinding equipment. Replace the comb if teeth become excessively worn, damaged or uneven.
Project Cases	Wide sheep shearing combs are commonly supplied as replacement consumables for commercial shearing sheds, sheep farms and professional contractors. For large flock operations, combs can be supplied together with cutters, handpieces, shearing machines, grinding equipment and maintenance accessories. Bulk and distributor packaging can also be configured for livestock equipment dealers and agricultural project purchasers requiring recurring spare-part supply.
Product FAQ	Q: What is the advantage of a 96 mm wide shearing comb? A: The wider working profile provides broader coverage with each shearing blow and can improve productivity in suitable fleece conditions. Q: What type of wool is a 3 mm short bevel designed for? A: Short-bevel combs are generally suitable for good-combing sheep and open wool conditions. Q: What does run-in thickness mean? A: A run-in comb is prepared for professional operation with minimal initial modification before use, subject to correct handpiece setup. Q: Does the comb require a cutter? A: Yes. The comb and reciprocating cutter work together to form the complete cutting system. Q: Can the comb be sharpened? A: Yes. Professional shearing combs can normally be reground several times when correct grinding equipment and procedures are used. Q: Can other bevel lengths be supplied? A: Yes. Short-, medium- and long-bevel configurations can be supplied according to fleece type and project requirements. Q: Can matching cutters be supplied together? A: Yes. Matching cutters, comb-and-cutter sets and replacement packages are available upon request.
Product Gallery