| Product Showcase | Content |
|---|---|
| Product Name | Replacement Rectangular Vibratory Screen Panel |
| Product Image |
![]() |
| Product Overview | The Replacement Rectangular Vibratory Screen Panel provides a screening surface for compatible rectangular shaker and vibratory separator decks. For commercial pig farm projects, a suitably specified panel can be used to remove coarse solids from manure slurry before downstream pumping, separation or wastewater treatment. Panels are made to match the existing deck and its fastening arrangement, subject to dimensional and application review. |
| Key Features |
|
| Structural Components | A typical assembly includes screening media and its mounting edges. Depending on the existing separator, the panel may use woven wire mesh with formed hooks, a tensioned screen construction or media secured to a supporting frame. Edge shape, support details and fastening points must match the deck; configurations are not interchangeable without verification. |
| Working Principle | The vibrating deck moves incoming material across the panel. Liquid and particles smaller than the selected openings pass through to the collection area, while retained solids travel toward the discharge end. Screening performance depends on feed consistency, flow rate, opening size, deck motion and correct panel tension or seating. |
| Technical Specifications |
|
| Applications | Potential applications include screening livestock manure slurry, removing coarse debris ahead of a secondary separator, and processing compatible agricultural or wastewater streams. Suitability for wet pig manure must be checked against the separator's deck design and the risk of screen blinding. |
| Customization Options | Panel length and width, screen opening, wire specification, material and mounting edges can be customized. Please provide the separator make and model, a photograph of the installed panel, overall dimensions, hook or frame details, and the material being screened. The configuration can then be reviewed for the local farm environment and maintenance practices. |
| Installation & Maintenance | Stop the feed and isolate the vibratory drive before opening the screen deck. Remove the old panel, clean its support surfaces and inspect the clamps or tensioning hardware. Seat and secure the replacement according to the separator manufacturer's procedure; check that it is supported evenly and cannot move against the frame. Inspect regularly for loose edges, damaged mesh, corrosion and blocked openings. Use a cleaning method appropriate for the selected media. |
| Product FAQ |
Can this panel fit an existing separator? Which opening size is suitable for pig manure slurry? Is a complete vibratory separator included? |
| Product Gallery |
![]() |

Comments & Inquiries
Leave your questions or requirements below. We will reply as soon as possible.