Stainless Steel Piglet Tooth Nippers

• 140 mm piglet tooth nippers
• Stainless steel forged construction
• Curved cutting head
• Sharp hardened cutting edges
• Built-in spring-return mechanism
• Ergonomic metal handles

• High-Quality Stainless Steel: Durable construction supports repeated farm use and routine cleaning.
• One-Piece Forged Body: Integrated forging improves structural strength and reliability.
• Curved Cutting Head: Designed to provide convenient access inside the piglet oral cavity.
• Sharp Cutting Edge: Hardened jaws provide clean and controlled cutting performance.
• Spring Return: High-elasticity internal spring automatically reopens the handles after each cut.
• Compact 140 mm Size: Convenient for handling during routine piglet-care procedures.
• Reusable Tool: Suitable for repeated professional use after proper cleaning, disinfection and inspection.

The current product specification confirms 140 mm length, approximately 113 g weight, stainless steel construction, curved cutting head, one-piece forging and an internal spring-return mechanism.

• Piglet needle-tooth management where permitted
• Commercial pig farms
• Farrowing and piglet-care units
• Swine breeding farms
• Veterinary piglet-care programs
• Pig farm equipment and veterinary tool kits

• Inspect the cutting jaws, spring and handles before each use.
• Do not use the tool if the cutting edges are chipped, misaligned or damaged.
• Use only by trained personnel following applicable animal welfare and veterinary requirements.
• Remove organic residue promptly after use.
• Clean and disinfect the jaws and handles using methods compatible with stainless steel.
• Dry the tool thoroughly after cleaning.
• Check the spring-return action regularly and replace the tool if the mechanism becomes unreliable.
• Store in a clean, dry and protected environment.

What is the length of the tooth nippers?
The current product specification is 140 mm.

What is the product weight?
The current specification lists an approximate weight of 113 g.

What material is used?
The tool is manufactured from high-quality stainless steel.

Why is the cutting head curved?
The curved head provides easier access inside the piglet oral cavity and improves tool positioning during professional use.

Does the tool reopen automatically?
Yes. A built-in high-elasticity spring returns the handles to the open position after pressure is released.

Can the tool be reused?
Yes. It is reusable after proper cleaning, disinfection, inspection and drying.

Are piglet teeth always required to be clipped?
No. Requirements vary by farm conditions and local animal welfare regulations. The procedure should only be performed when justified and permitted.

What information is required for a quotation?
Please provide the required quantity, packaging requirements and any OEM or private-label requirements.