S-Type Tension and Compression Load Cell

Reference image of an S-type load cell. The supplied model and mounting dimensions require confirmation.

• Measures axial tension and compression with one sensor.
• Compact S-beam form fits many suspended and in-line weighing assemblies.
• Threaded connection points facilitate installation with compatible adapters.
• Strain gauge output can be connected to a suitable weighing indicator or controller.
• Capacity, material, sealing, and cable configuration are selected according to project requirements.

• Sensor type: S-type strain gauge load cell
• Measurement direction: Tension and compression
• Rated capacity: Available upon request
• Body material and surface protection: According to the selected model
• Thread size, dimensions, and cable length: Confirmed for the selected model
• Output, excitation, and environmental rating: Available upon request

Final specifications and any required approvals must be verified against the supplied model's datasheet.

Can one sensor measure both pulling and pushing forces?
Yes, provided the selected model and mounting adapters are suitable for both loading directions.

Can it be used for a suspended feed hopper?
Yes, after confirming the hopper's maximum load, number of support points, load alignment, and required environmental protection.

Does the load cell include a digital display?
A load cell is a sensor. A compatible indicator or controller is needed to display and process its signal.

What information is needed for selection?
Please provide the application, maximum tension and compression loads, mounting drawing, required accuracy, cable length, and operating environment.

Gallery images illustrate related S-type sensors and mounting methods; they are not photographs of a confirmed SHEWUYOU installation.