| Product Showcase | Content |
|---|---|
| Product Name | Covered Lagoon Anaerobic Digester System |
| Product Image |
![]() |
| Product Overview | The Covered Lagoon Anaerobic Digester System uses an engineered, gas-tight cover over an in-ground lagoon to collect biogas generated as livestock manure and organic farm wastewater break down without oxygen. It can be planned for a new lagoon or evaluated as a retrofit to an existing manure lagoon. For commercial pig farms and dairy operations, the design connects manure collection, lagoon containment, gas handling and effluent management in one site-specific treatment layout. |
| Key Features |
|
| Structural Components | A project may include a graded earthen lagoon, bottom and sidewall liner where required, floating geomembrane cover, perimeter anchor trench or other engineered attachment, ballast layout, rainwater drainage, sealed feed and discharge penetrations, and biogas collection piping. Gas conditioning, a flare, energy equipment, monitoring devices and downstream effluent treatment are specified according to project scope. Adjacent pumps, pipe supports and steel structure service buildings are coordinated with the farm layout. |
| Working Principle | Manure slurry or organic wastewater enters the contained lagoon. Anaerobic microorganisms decompose biodegradable material beneath the cover, producing biogas that accumulates in designated spaces and flows to the gas collection line. The gas is then directed to the treatment, flaring or energy-use equipment selected for the project. Treated lagoon effluent leaves through an engineered outlet for storage, further treatment or permitted reuse. In an unheated lagoon, biological activity and gas production vary with seasonal temperature. |
| Technical Specifications |
|
| Applications | Commercial swine facilities, dairy farms, cattle operations, livestock breeding groups and agricultural biogas projects with suitable manure or wastewater lagoons. The system is particularly relevant where a large-volume liquid waste stream and available land support lagoon-based treatment. Suitability for an existing lagoon requires a review of its dimensions, liner, embankments, freeboard and operating condition. |
| Customization Options | Cover material, lagoon and liner arrangement, ballast pattern, anchoring detail, rainwater removal, gas take-off points, feed distribution and outlet arrangement can be selected for the site. Project engineering should use the daily wastewater volume, manure characteristics, lagoon survey, local weather data and planned biogas use. |
| Installation & Maintenance | Installation includes lagoon assessment or earthworks, liner preparation where required, membrane placement and seam joining, perimeter anchoring, and connection of gas, drainage and process piping. Seams and penetrations should be checked before commissioning. Routine maintenance includes inspecting the cover and anchors, removing accumulated rainwater, checking gas and condensate lines, and monitoring lagoon level and operating conditions. Access and safety provisions are established during detailed design. |
| Product FAQ |
Can an existing manure lagoon be covered? Is a lagoon liner required? Does the digester make effluent ready for discharge? |
| Product Gallery |
|




Comments & Inquiries
Leave your questions or requirements below. We will reply as soon as possible.