| Product Showcase | Content |
|---|---|
| Product Name | Livestock Wastewater SBR Treatment System |
| Product Image |
Illustrative SBR reference image courtesy of Parkson; the supplied system configuration may differ. |
| Product Overview | The Livestock Wastewater SBR Treatment System uses a sequencing batch reactor to treat biodegradable wastewater from commercial livestock operations. After suitable solids removal and flow equalization, wastewater enters a biological tank where filling, aeration, settling and clarified-water discharge occur in a controlled sequence. The system can be designed for new pig farm construction or integrated into an existing manure and wastewater treatment line. |
| Key Features |
|
| Structural Components | A typical treatment line includes inlet screening or solids separation, an equalization tank, transfer pumps, an SBR tank, aeration blowers, air distribution piping and diffusers, a decanter, excess-sludge discharge equipment, level instruments and an electrical control cabinet. Tank construction, equipment supports and any steel structure building or protective enclosure are selected for the project site. |
| Working Principle | Pretreated wastewater is fed to the reactor in batches. During the reaction phase, aeration supplies oxygen to activated-sludge microorganisms; selected non-aerated periods may support denitrification. Aeration then stops so the biomass can settle. A decanter removes clarified water from above the settled sludge, and excess sludge is withdrawn as required. The controller repeats the cycle according to the operating program. |
| Technical Specifications |
|
| Applications | Suitable as a biological treatment stage for pretreated pig farm wastewater, dairy barn wash water, livestock housing wastewater and liquid streams from manure treatment. For wastewater with high concentrations of fibers, grit or suspended solids, appropriate upstream separation is required before the SBR stage. |
| Customization Options | The reactor layout, pretreatment equipment, aeration capacity, cycle controls, sludge handling and downstream treatment can be configured for the farm's wastewater characteristics. Optional process stages may be evaluated where further nutrient removal, filtration or disinfection is required. Final selection depends on representative influent data and the intended effluent destination. |
| Installation & Maintenance | Install the tanks and equipment on engineered foundations with access for lifting, inspection and sludge removal. Connect the inlet, treated-water outlet, sludge line, air piping and electrical supply before commissioning the biological process. Routine checks include diffuser performance, blower operation, decanter movement, sensor readings, sludge settling and control alarms. Operating settings should be reviewed when farm wastewater flow or composition changes. |
| Product FAQ |
Can raw manure slurry be pumped directly into the SBR? Can the system be installed beside an existing pig house? What is needed to size the system? |
| Product Gallery | ![]() ![]()
Illustrative SBR reference images courtesy of Parkson; they do not depict a SHEWUYOU installation. |


Comments & Inquiries
Leave your questions or requirements below. We will reply as soon as possible.