Product Showcase	Content
Product Name	80L Ten-Teat Group Calf Milk Feeder
Product Image
Product Overview	The 80L Ten-Teat Group Calf Milk Feeder is designed for efficient group feeding in commercial dairy farms, calf-rearing centers and replacement-heifer facilities. The large common reservoir supplies ten feeding positions, allowing multiple calves to drink simultaneously from one feeder. The non-compartmented construction simplifies filling and cleaning, while ten controlled-flow calf teats support natural suckling behavior. Steel mounting brackets are included for stable installation on suitable calf-pen fencing or livestock housing structures.
Key Features	80L large-capacity reservoir for commercial group calf feeding. Ten feeding positions allow up to ten calves to suckle simultaneously. Non-compartmented internal design provides a common milk reservoir. Controlled-flow teats encourage stronger and more natural suckling action. Internal teat valve helps retain milk inside the teat between suckling movements. Dual milk openings help provide reliable flow while reducing leakage. Threaded teat caps simplify secure installation and individual teat replacement. Steel mounting brackets are included for stable pen installation. Large open reservoir allows convenient filling, inspection and cleaning. Gravity-fed operation requires no electrical power or milk pump.
Structural Components	80L Reservoir: Large molded feeding container without internal milk compartments. Ten Feeding Outlets: Evenly arranged along the curved lower section for group access. Calf Teats: Ten natural-rubber feeding teats designed for controlled milk delivery. Internal Flap Valves: Responsive teat structure that retains milk during the suckling cycle. Threaded Teat Caps: Secure each teat to the feeder and allow convenient replacement. Steel Mounting Brackets: Provide stable attachment to compatible calf-pen structures. Open Filling Area: Wide upper opening supports rapid filling and thorough sanitation.
Working Principle	Fresh milk or properly prepared milk replacer is poured into the common 80L reservoir. Gravity supplies milk to each of the ten feeding teats positioned around the lower section of the feeder. During suckling, the teat's internal flap-valve responds to the calf's mouth movement and helps maintain milk within the teat. The controlled flow encourages active suckling and saliva production while allowing several calves to feed from the same reservoir at the same time.
Technical Specifications	Product Type Group Calf Milk Feeder Nominal Capacity 80 L Number of Teats 10 Feeding Positions Up to 10 Calves Simultaneously Internal Configuration Common Reservoir without Compartments Teat Material Specially Formulated Natural Rubber Teat Connection Threaded Teat Caps Milk Supply Gravity Fed Length 1130 mm Width 520 mm Height 300 mm Mounting Hardware Steel Mounting Brackets Included Reference Configuration FC10 Alternative Nipple Option Lamb Nipples and Caps Available upon Request
Applications	Commercial dairy calf group pens. Large-scale calf-rearing and replacement-heifer facilities. Indoor livestock buildings and sheltered outdoor calf housing. Galvanized steel and tubular calf-pen systems. Whole-milk and prepared milk-replacer feeding programs. Batch feeding of larger calf groups from one common reservoir. Dairy farm construction and livestock equipment projects. Livestock equipment distributors and agricultural suppliers.
Customization Options	Alternative nipple configurations can be supplied according to livestock and project requirements. Lamb nipples and compatible caps are available upon request. Additional feeder, mounting and project configurations can be discussed according to application requirements.
Installation & Maintenance	Install the feeder securely on a suitable calf-pen rail or partition using the steel mounting brackets. Position the teat line at a comfortable suckling height for the calf group. Confirm that all threaded teat caps are secure before filling the reservoir. Use fresh milk or correctly prepared milk replacer for each feeding cycle. Remove remaining milk promptly after feeding. Wash the reservoir and feeding outlets thoroughly after use. Remove teats periodically for detailed cleaning and inspection. Rinse all components thoroughly and allow them to dry before reassembly. Replace damaged, hardened or excessively worn teats when required. Inspect mounting brackets regularly to maintain secure installation.
Product FAQ	Q: What is the capacity of this calf feeder? A: The common milk reservoir has a nominal capacity of 80 liters. Q: How many calves can drink at the same time? A: The feeder provides ten teat positions and can accommodate up to ten calves simultaneously. Q: Does the feeder have individual milk compartments? A: No. This model uses one common non-compartmented reservoir supplying all ten teats. Q: Are mounting brackets supplied? A: Yes. Steel mounting brackets are included with the reference configuration. Q: Does the feeder require electricity? A: No. It is designed as a simple gravity-fed milk feeder. Q: Can it be used with milk replacer? A: Yes. It can be used with whole milk or correctly prepared calf milk replacer. Q: Can alternative nipples be supplied? A: Yes. Lamb nipples and compatible caps are available upon request. Q: Are the teats replaceable? A: Yes. The threaded mounting system allows individual teats to be removed and replaced as part of routine maintenance.
Product Gallery