8L Flat-Back Calf Feeding Bucket with Teat

• 8 L Feeding Capacity: Practical capacity for individual calf milk and milk-replacer feeding programs.
• Flat-Back Design: The straight rear surface improves stability against calf pen panels, gates or walls.
• Low-Residue Bottom Profile: The shaped base helps direct milk toward the feeding outlet so calves can consume more of the prepared ration.
• Reinforced Plastic Construction: Side and bottom reinforcement increases durability for repeated commercial farm use.
• Food-Grade Material: Suitable for milk-feeding applications and routine calf-house hygiene procedures.
• Graduated Bucket: Volume markings assist with consistent preparation and monitoring of individual feeding quantities.
• Natural Rubber Calf Teat: Replaceable teat supports natural suckling behaviour and controlled liquid intake.
• Easy-Clean Interior: Smooth geometry with reduced right-angle corners simplifies rinsing and sanitation.
• Metal Carry Handle: Provides convenient transport between milk preparation and calf housing areas.
• Optional Wall Bracket: Galvanized mounting hardware can be used for secure installation on suitable calf housing structures.

• Flat-Back Bucket Body: Molded plastic body designed to rest securely against a flat pen or wall surface.
• Reinforced Side Panels: Additional molded structure improves resistance to impact and repeated handling.
• Reinforced Base: Strengthened lower section supports daily use and maintains the bucket profile.
• Graduation Scale: Molded or marked volume indicators assist with ration control.
• Rubber Calf Teat: Food-contact teat positioned at the lower front of the bucket.
• Teat Holder / Valve Assembly: Secures the teat to the bucket and controls milk delivery toward the nipple.
• Metal Handle: Supports filling, carrying and positioning during feeding rounds.
• Optional Galvanized Bracket: Allows fixed or removable wall-side mounting according to calf pen configuration.

• Commercial dairy calf-rearing farms
• Beef calf-rearing operations
• Individual calf pens
• Individual calf hutches
• Calf nursery barns
• Milk-replacer feeding programs
• Young-stock housing systems
• Veterinary and treatment pens
• Large-scale calf housing and livestock equipment projects

• Alternative bucket colours available upon request
• Custom logo and brand identification
• Alternative rubber teat specifications
• Different teat holder and valve configurations
• Galvanized wall or pen mounting brackets
• Optional protective lid according to feeding system
• Replacement teat, seal and valve components
• OEM packaging and bulk supply for distributors and commercial cattle projects

• Install the bucket against a flat calf pen panel, gate or wall using a suitable mounting bracket where required.
• Position the teat at an appropriate height for the calf's age and body size.
• Ensure the flat rear surface sits securely against the supporting structure before feeding.
• Use the graduation scale to prepare consistent individual feeding quantities.
• Remove residual milk promptly after each feeding cycle and do not allow liquid to stagnate.
• Rinse the bucket with lukewarm water before milk residues dry on the internal surface.
• Remove and wash the teat and valve components according to the farm's sanitation program.
• Inspect the rubber teat for cracking, excessive wear or enlarged openings and replace when necessary.
• Store cleaned buckets in a shaded, protected and well-ventilated location when not in use.
• Allow the bucket and feeding components to dry thoroughly before the next feeding cycle.

Q: What is the capacity of the feeding bucket?
A: The reference configuration has an 8-liter capacity for individual calf milk feeding.

Q: What is the advantage of the flat-back design?
A: The flat rear surface sits more securely against a pen panel, gate or wall, improving stability while the calf is suckling.

Q: How does the shaped bottom reduce milk waste?
A: The optimized lower profile directs more of the remaining liquid toward the teat outlet so less milk is left in the bucket.

Q: Does the bucket include a teat?
A: The reference complete configuration includes one teat holder and one rubber calf teat.

Q: Does the bucket have volume markings?
A: Yes. The bucket incorporates a graduation scale to support consistent feeding quantities.

Q: Can it be mounted on a calf pen?
A: Yes. A compatible galvanized mounting bracket can be supplied for suitable walls, gates and calf pen structures.

Q: Is the teat replaceable?
A: Yes. The rubber teat and related feeding components can be replaced individually when worn.

Q: Is the bucket easy to clean?
A: Yes. Smooth internal surfaces and reduced sharp internal corners simplify routine washing and sanitation.

Q: What information is required for quotation?
A: Please provide required quantity, preferred colour, teat and valve specification, mounting accessories, logo requirements and packaging details.