8L Hygienic-Valve Calf Feeding Bucket

• 8 L Capacity: Suitable for controlled individual calf milk and milk-replacer feeding.
• Hygienic Flap Valve: The flap mechanism provides easier access to milk-contact surfaces than conventional ball-check valve designs.
• Easy Brush Cleaning: Internal valve areas can be reached using a suitable round cleaning brush.
• Removable Intake Section: Helps eliminate difficult-to-reach areas where milk residues can accumulate.
• Bayonet Teat Connection: Allows quick installation and removal of the teat without repeatedly threading components.
• Integrated Drying Aid: Provides a dedicated position for storing the cleaned teat and bayonet ring during drying.
• Embossed Measuring Scale: Supports consistent preparation of individual feeding quantities.
• Acid-Resistant Plastic: Designed for repeated milk and milk-replacer feeding and routine calf-house cleaning.
• Metal Carry Handle: Provides convenient transport, filling and handling during feeding rounds.
• Accessory Compatible: Mounting brackets, bucket guards, covers and replacement valve components are available according to requirements.

• Plastic Bucket Body: Durable molded container with integrated volume graduations.
• Hygienic Valve Body: Milk-control assembly incorporating an easy-clean flap mechanism.
• Valve Flap: Replaces the conventional ball element and supports easier internal cleaning.
• Removable Intake Elbow: Provides access to internal milk passages during washing.
• Bayonet Ring: Secures the calf teat and allows rapid removal and refitting.
• Calf Teat: Replaceable teat designed for natural suckling during milk feeding.
• Drying Aid: Holds cleaned teat components away from contaminated surfaces.
• Metal Handle: Supports carrying and positioning of the complete feeding bucket.

• Commercial dairy calf-rearing farms
• Beef calf-rearing operations
• Individual calf pens
• Individual calf hutches
• Group calf housing with controlled feeding
• Calf nursery barns
• Whole-milk feeding programs
• Milk-replacer feeding programs
• High-hygiene calf management systems
• Large-scale cattle farm and calf-house equipment projects

• Alternative bucket colours according to order requirements
• Custom company logo and identification marking
• Alternative compatible calf teat specifications
• Hygienic valve spare-part kits
• Galvanized mounting brackets
• Optional bucket guards
• Optional protective covers
• Replacement drying aids and bayonet components
• OEM packaging and bulk supply for distributors and commercial calf-farm projects

• Install the bucket securely on a suitable calf pen, hutch or feeding partition using the required mounting bracket.
• Position the teat at an appropriate suckling height according to calf age and housing design.
• Check that the hygienic valve, bayonet ring and teat are securely assembled before filling.
• Use the embossed measuring scale to maintain consistent individual feeding quantities.
• Remove residual milk promptly after every feeding cycle.
• Release the teat using the bayonet connection and separate accessible valve components for cleaning.
• Clean internal milk passages thoroughly with a suitable round brush.
• Rinse all milk-contact surfaces and allow them to drain completely.
• Store the cleaned teat and bayonet ring on the integrated drying aid until the next feeding.
• Inspect valve flaps, seals, teat surfaces and connection components regularly for wear or damage.
• Follow the farm's established milk-feeding, washing and disinfection protocol.

Q: What is the capacity of the bucket?
A: The reference configuration has an 8-liter capacity.

Q: What is different about the hygienic valve?
A: It uses a flap mechanism instead of a conventional ball-check design, providing easier access to internal milk-contact areas during cleaning.

Q: Can the valve be cleaned with a brush?
A: Yes. The valve geometry is designed to allow cleaning with a suitable round brush.

Q: Is the teat easy to remove?
A: Yes. A bayonet connection allows the teat to be quickly released and reinstalled.

Q: What is the drying aid used for?
A: It provides a clean position for storing the washed teat and bayonet ring while they dry between feeding cycles.

Q: Does the bucket have a measuring scale?
A: Yes. An embossed fill scale helps operators prepare consistent milk or milk-replacer quantities.

Q: Can replacement valve parts be supplied?
A: Yes. Valve bodies, flaps, bayonet components, locknuts, elbows, drying aids and compatible teats can be supplied according to requirements.

Q: Can it be mounted on a calf hutch or pen?
A: Yes. Compatible mounting brackets and bucket guards are available for suitable calf housing structures.

Q: What information is required for quotation?
A: Please provide required quantity, bucket colour, teat specification, mounting accessories, spare-part requirements, logo requirements and packaging preferences.