Global Livestock Equipment Manufacturer & Supplier
SHEWUYOU · Livestock Equipment
Integrated Equipment Solutions for Pig, Cattle & Poultry Farms

Hopper-Fed Manure Screw Press Separator

Product Showcase Content
Product Name Hopper-Fed Manure Screw Press Separator
Product Image
hopper-fed manure screw press separator
Product Overview The Hopper-Fed Manure Screw Press Separator is designed for further dewatering manure solids delivered from an upstream screening or separation stage. Its receiving hopper allows screened material to enter the press by gravity, reducing the need for a separate transfer step between machines. The press expresses additional liquid and discharges solids for collection and further processing. It can be integrated into manure treatment facilities serving commercial pig farms and steel structure livestock buildings.
Key Features
  • Receiving hopper supports direct placement beneath a compatible upstream screen or conveyor.
  • Rotating screw moves and compresses the incoming manure solids.
  • Screened pressing section releases liquid to a separate collection outlet.
  • Discharge resistance can be specified to suit the desired solids consistency.
  • Accessible covers and wear components support routine inspection and maintenance.
Structural Components A typical assembly comprises a receiving hopper, press screw, perforated or wedge-wire dewatering section, gearmotor, liquid collection outlet, solids discharge and support frame. Depending on the selected design, the outlet may use a mechanical or controlled door arrangement to maintain compression. Wetted materials and wear protection are selected according to the manure and operating conditions.
Working Principle Pre-screened manure solids fall into the hopper and enter the screw channel. As the screw advances the material through the pressing section, compression forces liquid through the screen into a drain. The dewatered solids leave through the end outlet. Final solids dryness and throughput depend on feed consistency, screen configuration, screw operation and outlet resistance.
Technical Specifications
  • Feed capacity: According to project requirements and upstream separator output.
  • Hopper dimensions and mounting angle: Customizable.
  • Screen construction and opening: Available upon request.
  • Motor power and electrical supply: Selected for the required duty.
  • Target solids dryness: Confirmed against representative feed material and operating settings.
Applications Suitable for secondary dewatering after a sloped screen or other compatible primary separator. In a pig farm manure treatment line, the expressed liquid can be directed to storage or further treatment, while the pressed solids can be collected for composting, transport or other approved uses. Feed suitability should be checked before specifying the press for unscreened slurry.
Customization Options Hopper geometry, frame height, installation angle, screen, screw wear protection, outlet control and discharge chute can be coordinated with the upstream separator and site drawings. Controls and liquid drainage connections can be integrated into a new pig farm construction project or an existing manure processing facility.
Installation & Maintenance Mount the press on a stable structure beneath the upstream discharge, allowing clear access to the hopper, drive, screen and solids outlet. Provide independent support for connected equipment and a free-draining route for expressed liquid. Check feed distribution during commissioning. Inspect the screen, screw, seals and outlet mechanism regularly; isolate the drive and upstream feed before opening covers or clearing obstructions.
Product FAQ

Can this press receive raw liquid pig slurry directly?
This hopper-fed arrangement is primarily intended for material delivered from an upstream screening or separation stage. Direct slurry feeding requires a separately assessed configuration.

Does the hopper simplify integration?
It allows a compatible upstream unit to discharge into the press by gravity when the equipment heights and feed rates are coordinated.

What information is needed for selection?
Provide the feed material, upstream equipment, expected feed rate, target solids consistency, installation drawings and electrical supply.

Product Gallery

hopper-fed manure screw press installed below sloped screen

hopper-fed manure separator outlet control detail

pig farm screw press manure separation installation

Illustrative reference images: Valmetal and Stallkamp. The pictured installations are third-party projects; supplied equipment may differ.


Comments & Inquiries

Leave your questions or requirements below. We will reply as soon as possible.