2kg Salt Lick Holder for Livestock

The 2kg Salt Lick Holder is a compact wall-mounted livestock accessory designed to keep rectangular salt and mineral blocks securely positioned above the floor. It provides animals with convenient access to mineral supplements while helping protect the block from bedding, manure and unnecessary ground contamination.

Manufactured from durable modified polypropylene, the holder combines low weight with good impact resistance and a bite-resistant structure suitable for routine livestock use. Its open-front configuration gives animals easy access to the lick while retaining the block and smaller remaining pieces inside the holder.

The unit is suitable for horse stalls, livestock pens, feeding areas and agricultural buildings. For commercial livestock projects, mounting arrangements, packaging and other project-specific requirements can be coordinated according to farm conditions.

• Designed for 2kg Blocks: Suitable for commonly used rectangular 2kg salt lick and mineral blocks.
• Durable Polypropylene Construction: Manufactured from modified polypropylene for lightweight handling and dependable service in livestock environments.
• Bite-Resistant Material: Designed to withstand regular contact with animals in stalls and feeding areas.
• Non-Toxic Plastic: Suitable for use as livestock feeding and mineral-supplement equipment.
• Wall-Mounted Design: Four mounting points provide simple installation on suitable stable walls, partitions or structural surfaces.
• Raised Side Protection: Side walls help retain the mineral block and reduce loss of broken pieces.
• Improved Hygiene: Keeping the block above floor level helps reduce direct contact with bedding, manure and wet ground.
• Compact Footprint: Appropriate for individual pens, stalls and livestock housing where space efficiency is important.
• Low Maintenance: Smooth plastic surfaces are easy to inspect and clean during routine farm sanitation.

The holder uses a simple gravity-supported structure. A compatible rectangular salt or mineral block is inserted into the open holder and supported by the lower section while the raised back and side walls restrict unwanted movement.

Once mounted at an appropriate height, livestock can freely lick the exposed surface. As the block becomes smaller, remaining fragments stay within the holder rather than falling directly onto the floor, helping improve mineral utilization and cleanliness around the feeding area.

Final dimensions, colour, packaging and project-specific configuration should be confirmed before bulk ordering.

• Horse stalls and equestrian stable equipment systems
• Cattle and calf housing where compatible 2kg mineral blocks are used
• Sheep and goat pens according to livestock management requirements
• Pig farm mineral supplementation areas where the selected mineral block and mounting arrangement are appropriate
• Breeding farms and commercial livestock facilities
• Livestock feeding and mineral supplementation stations
• Steel structure livestock buildings and prefabricated farm sheds
• Agricultural equipment distribution and dealer programs
• Livestock farm construction and renovation projects

For commercial livestock projects and distributor orders, product requirements can be coordinated according to the intended farm application. Available options may include:

• Product colour according to project requirements
• OEM branding and private-label packaging
• Bulk packing configuration for distributors and agricultural projects
• Mounting requirements according to livestock pen construction
• Associated mineral block holder sizes available upon request
• Project quantities according to farm capacity
• Configuration designed according to local climate and farm conditions

Installation Position: Select a strong, flat mounting surface inside the stall, livestock pen or feeding area. Position the holder where animals can reach the mineral block comfortably without interfering with gates, drinkers or other farm equipment.

Fastening: Use the four mounting holes with screws and anchors appropriate for timber, concrete, steel structure panels or other mounting substrates. Fasteners are normally selected separately according to the installation surface.

Height: Mounting height should be selected according to animal species, body size and farm management practice.

Inspection: Check the holder and fasteners periodically for loosening, excessive wear or damage caused by animal impact.

Cleaning: Remove residual mineral deposits and contamination during regular livestock-house cleaning. Wash with an appropriate farm cleaning procedure and allow the holder to dry before inserting a new block.

Q1: What size salt block does this holder accept?

It is designed for compatible rectangular salt or mineral blocks with a nominal weight of approximately 2kg.

Q2: What material is the holder made from?

The standard design is manufactured from modified polypropylene, providing a lightweight, bite-resistant and non-toxic structure suitable for livestock use.

Q3: How is the salt lick holder installed?

The unit is wall mounted using four fixing points. Appropriate screws or anchors should be selected according to the wall, pen panel, timber post or structural mounting surface.

Q4: Does the holder help reduce mineral block waste?

Yes. The raised sides and lower support help retain the block and smaller remaining pieces instead of allowing them to fall directly onto the livestock-house floor or bedding.

Q5: Can it be used in commercial livestock buildings?

Yes. Its compact wall-mounted construction is suitable for individual stalls and livestock pens where compatible 2kg mineral blocks are used. The installation method should be selected according to the building and pen structure.

Q6: Can products be supplied for distributor or farm project orders?

Yes. Bulk supply, packaging, branding and related project requirements can be arranged according to order quantity and project specifications.