Automatic Electric Spray Disinfection System

• Automatic Spray Control: Supports programmed or operator-controlled spraying cycles for repeatable farm sanitation procedures.
• Electric Pumping System: Provides powered liquid delivery without requiring manual pressure generation.
• Multi-Nozzle Distribution: Multiple nozzles can be positioned to match the dimensions and geometry of the designated spraying zone.
• Controlled Application: Pump output, spray duration and nozzle arrangement can be configured according to the application.
• Fixed Installation: Suitable for integration into personnel passages, livestock-house entrances and other defined biosecurity points.
• Reduced Operator Handling: Automation can reduce repetitive manual spraying tasks in frequently used sanitation zones.
• Modular Fluid Circuit: Pump, filter, piping, valves and nozzles can be selected and serviced as individual system components.
• Project-Based Engineering: System dimensions, nozzle quantity, electrical controls and installation structure can be designed around the farm layout.
• Integration Capability: Control functions can be developed for integration with selected access, sensor or farm management procedures where required.

Professional spray-system engineering commonly uses dedicated control panels, automated controls and application-specific system design to maintain consistent operating conditions. ([spraysystems.com](https://www.spraysystems.com/5-accessories-for-your-spray-booth-to-save-you-time-and-money/))

Exact pump power, pressure, flow rate, tank capacity, spray range, nozzle type and control functions are variable parameters and should be confirmed according to the final system design. Spray-system manufacturers also use application-specific engineering rather than a single configuration for all installations. ([spraysystems.com](https://www.spraysystems.com/))

• Commercial pig farm personnel entrances
• Swine production biosecurity checkpoints
• Farrowing, nursery and finishing farm access zones
• Poultry house entrances and hygiene transition areas
• Livestock quarantine and controlled-access areas
• Personnel changing and sanitation passages
• Farm service corridors and controlled transition zones
• Livestock equipment and agricultural facility sanitation
• New pig farm construction and renovation projects
• Biosecurity system upgrades for large livestock operations

In a commercial pig farm, the automatic spray system can be positioned at a defined transition point between hygiene zones. It may operate as one component of a broader biosecurity system together with controlled access, hand hygiene, protective clothing, boot sanitation and other farm-specific procedures.

1. Confirm the installation location, passage dimensions and available electrical supply before installation.
2. Secure the pump, control cabinet, tank or other main components on the designated mounting structure.
3. Install liquid supply pipes and spray nozzles according to the approved project layout.
4. Connect valves, sensors and control components according to the system wiring diagram.
5. Check all liquid connections, filters, nozzles and electrical terminals before commissioning.
6. Test the automatic spraying cycle with clean water before introducing disinfectant.
7. Adjust spray duration, nozzle direction and output according to the approved application procedure.
8. Use only liquid formulations compatible with the tank, pump, seals, pipes and nozzles.
9. Flush the liquid circuit with clean water when appropriate after chemical use.
10. Inspect nozzles, filters, valves, seals, electrical connections and pipe joints regularly.
11. Keep control and electrical components protected from direct liquid exposure and maintain the system according to the equipment specification.

Commercial Pig Farm: An automatic spray zone can be installed at personnel entry points serving farrowing, nursery and finishing buildings to support standardized sanitation procedures.

Large Livestock Group: Multiple systems can be specified with consistent nozzle layouts and control functions for different barns, helping standardize equipment across a multi-building farm.

New Farm Construction: The system can be incorporated during the design and MEP installation stage of new pig houses, poultry buildings and other livestock facilities, with pipe routing and mounting structures coordinated with the building layout.

Q: What is an automatic electric spray disinfection system?
A: It is an electrically powered spraying system that automatically controls liquid delivery to one or more spray nozzles for repeatable application in designated farm biosecurity areas.

Q: Is it suitable for commercial pig farms?
A: Yes. It can be integrated into personnel entrances, hygiene transition zones and other controlled-access areas within commercial swine facilities.

Q: Can the spraying cycle be automated?
A: Yes. Depending on the selected configuration, automatic control can include timed spraying, valve control and selected sensor-based activation.

Q: Can the number of spray nozzles be customized?
A: Yes. Nozzle quantity and arrangement can be designed according to passage dimensions, required coverage and project requirements.

Q: Can it be integrated into a new pig farm construction project?
A: Yes. Pipe routing, mounting points, electrical connections and control components can be coordinated with the livestock building and biosecurity layout during the engineering stage.

Q: Can the system use different disinfectants?
A: Only compatible formulations should be used. Chemical compatibility with the pump, tank, seals, pipes and nozzles must be confirmed before operation, and the disinfectant manufacturer's instructions must be followed.

Q: Can the electrical specification be adapted for different countries?
A: Yes. Electrical components and power-supply configuration can be selected according to the destination market and local project requirements.

Q: Can SHEWUYOU provide OEM and project customization?
A: Yes. OEM, private-label and project-specific configurations are available upon request for livestock groups, engineering companies, distributors, agents and agricultural project contractors.