Galvanized Chick Feeder with Wire Grill

The Galvanized Chick Feeder with Wire Grill is a compact linear feeding trough designed for chicks during brooding and early rearing. Its galvanized steel body provides a durable feeding surface, while the upper wire grill separates feeding positions and helps prevent chicks from standing directly in the feed.

The simple floor-standing design requires no electricity or automatic control system and is suitable for commercial poultry houses, brooding areas, hatchery support facilities and livestock equipment packages for new steel structure poultry house projects.

• Galvanized Steel Construction: Robust metal structure designed for repeated use in poultry brooding environments.
• Anti-Waste Wire Grill: Divides the feeding area and helps reduce scratching and feed scattering.
• Cleaner Feed: The grill helps prevent chicks from standing inside the trough, supporting improved feeding hygiene.
• Multi-Access Design: Several chicks can feed simultaneously along the linear trough.
• Low-Profile Structure: Provides convenient feed access for young birds during early production stages.
• Easy Cleaning: Open trough construction allows convenient removal of residual feed and routine washing.
• Simple Operation: Manual filling requires no motor, electrical supply or automatic controller.

• Galvanized Feed Trough: Long metal channel used to hold dry chick starter feed.
• Wire Feeding Grill: Forms individual feeding spaces and limits chicks from entering the trough.
• End Plates: Close the trough ends and strengthen the feeder structure.
• Support Legs: Keep the feeding trough stable and slightly raised above the poultry house floor.
• Grill Support Assembly: Holds the wire structure securely above the feed channel.

Dry starter feed is manually distributed along the galvanized trough. Chicks reach the feed through the openings formed by the upper wire grill.

The grill separates feeding positions and limits direct entry into the trough, helping reduce contamination, scratching and unnecessary feed waste while maintaining convenient access along the feeder.

• Commercial broiler chick houses
• Layer pullet brooding facilities
• Broiler breeder chick rearing houses
• Hatchery chick placement areas
• Small and medium poultry farms
• Temporary starter feeding areas
• Livestock equipment packages for steel structure poultry house projects

• 30 cm and 50 cm reference lengths
• Customized trough length
• Galvanized sheet thickness
• Wire grill spacing
• Support-leg configuration
• Bulk packaging for distributors and poultry projects
• Specifications available according to project requirements

Place the feeder on a clean, firm and level poultry house floor. Distribute feeding units evenly throughout the brooding area according to chick numbers, stocking density and flock management requirements.

Remove residual or contaminated feed regularly. Clean the trough and wire grill between production cycles and allow all surfaces to dry before reuse. Inspect the grill, supports and galvanized surfaces periodically for deformation or damage.

Q: What is the purpose of the wire grill?
A: The wire grill separates feeding positions, helps prevent chicks from standing inside the trough and reduces feed scattering.

Q: What sizes are available?
A: Reference models are available in 30 cm and 50 cm lengths. Other specifications can be supplied according to project requirements.

Q: Does the feeder require electricity?
A: No. It is a manually filled chick trough feeder with no electrical or mechanical drive system.

Q: Is galvanized steel suitable for poultry houses?
A: Yes. Galvanized steel provides a durable surface for routine use in poultry environments when the feeder is cleaned and maintained correctly.

Q: Can SHEWUYOU supply this feeder in bulk?
A: Yes. Size, grill configuration, packaging and order quantities can be arranged for poultry farms, distributors and agricultural engineering projects.