Soft Rubber Calf Feeding Teat for Bottles & Buckets

The Soft Rubber Calf Feeding Teat is a replaceable livestock feeding component designed for individual calf milk bottles, teat buckets and compatible calf feeding systems. Its flexible rubber body provides a comfortable suckling surface while supporting controlled milk delivery during routine calf feeding.

The teat can be used for milk, colostrum and properly prepared milk replacer. Depending on the feeding system configuration, it can also be combined with compatible valve fittings or non-return valves to help reduce milk backflow. The simple pull-through or retaining-seat structure allows convenient installation, cleaning and replacement in commercial dairy farms and calf rearing facilities.

• Soft and flexible rubber construction for comfortable calf suckling.
• Bionic teat profile designed to imitate the feel of natural nursing.
• Suitable for calf milk bottles, feeding buckets and compatible teat feeder systems.
• Flexible teat wall responds to calf suction during milk intake.
• Selected configurations can be combined with non-return valve fittings to reduce milk backflow.
• Wide retaining base provides secure positioning in compatible bottle or bucket openings.
• Simple structure allows fast removal, cleaning and replacement.
• Suitable as a replacement and consumable component for commercial calf feeding programs.
• Bulk supply and OEM configurations are available for distributors and livestock equipment projects.

• Flexible Teat Body: Soft rubber section contacted by the calf during suckling.
• Milk Outlet: Teat-end opening provides controlled passage of milk during suction.
• Reinforced Base: Thicker lower section improves support around the installation area.
• Retaining Flange: Wide base helps secure the teat in a compatible bottle, bucket or feeder opening.
• Internal Milk Passage: Conducts milk from the feeding container toward the teat outlet.
• Optional Valve Interface: Compatible configurations can be connected to non-return or shut-off valve fittings.

The teat is installed in the outlet of a compatible calf bottle, feeding bucket or milk feeder. When the calf suckles the teat, negative pressure and repeated compression of the flexible rubber body draw milk through the internal passage and teat opening.

The elastic rubber construction allows the teat to respond naturally to the calf's suckling action. Where a compatible non-return valve is used, the valve helps limit reverse milk flow into the feeding line or container between suckling cycles.

• Individual calf milk feeding bottles.
• Single-teat and multi-teat calf feeding buckets.
• Calf milk bars and group feeding systems.
• Colostrum feeding equipment for newborn calves.
• Milk replacer feeding in commercial dairy calf rearing programs.
• Replacement teat programs for calf hutches and individual calf pens.
• Dairy farms, cattle breeding farms and livestock rearing centers.
• Livestock equipment dealers, distributors and agricultural project supply.

• Teat Size: Customizable according to feeder requirements.
• Rubber Hardness: Available upon request.
• Teat Color: Available upon request.
• Outlet Opening: Different slit or flow configurations available upon request.
• Base Configuration: Designed according to compatible bottle, bucket or feeder requirements.
• Valve Fittings: Compatible valve configurations available upon request.
• OEM Packaging: Customizable for distributors and livestock equipment brands.
• Bulk Supply: Available for commercial farms and agricultural projects.

• Confirm that the teat size and retaining base match the bottle, bucket or feeder opening before installation.
• Pull or seat the teat securely into the compatible mounting opening according to the feeder design.
• Where a non-return valve is used, check that the valve and teat are correctly connected before feeding.
• Wash and sanitize new teats before first use.
• Rinse milk residue immediately after each feeding cycle.
• Clean both the external teat surface and internal milk passage thoroughly.
• Allow the teat to drain and dry completely before storage or reuse.
• Inspect regularly for cracking, tearing, hardening, deformation or enlarged outlet openings.
• Replace worn teats promptly to maintain consistent milk flow and feeding hygiene.

Q: What feeding equipment can this calf teat be used with?
A: It can be supplied for compatible calf milk bottles, teat buckets, milk bars and other calf feeding systems.

Q: What material is the teat made from?
A: The standard configuration uses soft rubber designed for flexible livestock feeding applications.

Q: Can it be used with a non-return valve?
A: Yes. Compatible configurations can be combined with suitable non-return valve fittings to help reduce milk backflow.

Q: Can the teat be used for colostrum and milk replacer?
A: Yes. It is suitable for milk, colostrum and properly prepared milk replacer when installed in compatible calf feeding equipment.

Q: How often should a calf teat be replaced?
A: Replacement depends on feeding frequency, cleaning procedures and wear. Teats should be changed when cracks, hardening, deformation or excessive outlet wear are observed.

Q: Can the teat size be customized?
A: Yes. Teat dimensions, base configuration and selected flow-opening options can be customized according to feeder requirements.

Q: Is OEM packaging available for distributors?
A: Yes. Bulk packaging, private-label packaging and selected product configurations are available upon request.