SIPERT Manual Boot Washing & Disinfection Machine

• Cleaning & Disinfection in One Step: Water and compatible disinfectant solution can be used simultaneously during boot cleaning.
• Adjustable Disinfectant Ratio: The disinfectant supply can be regulated according to the selected hygiene procedure.
• Multi-Directional Brushes: Nylon brushes contact the sole, sides and lower surface of the boot to remove attached dirt.
• Bilateral Water Supply: Water pipes on both sides improve wetting and rinsing around the brush area.
• 304 Stainless Steel Frame: Corrosion-resistant structure is suitable for wet livestock farm environments.
• High-Strength Nylon Brushes: Durable bristles provide mechanical scrubbing for mud, manure and organic residue.
• Integrated Handrail: Provides additional operator support during manual boot cleaning.
• Dedicated Spray Gun: Included spray gun helps rinse the machine and remove debris trapped inside the brushes.
• Compact Footprint: Suitable for installation at farm entrances, changing areas and hygiene control points.
• No Complex Automation Required: Simple manual operation makes daily cleaning and maintenance straightforward.

• Pig farm biosecurity entrances
• Poultry house personnel entrances
• Cattle and goat-farming-equipment/" target="_blank" class="keylink">sheep farm changing areas
• Breeding farm hygiene stations
• Veterinary facilities
• Animal quarantine areas
• Artificial insemination laboratories
• Feed mills and livestock production facilities
• Slaughter and animal processing hygiene areas

• Install the machine on a level, non-slip floor with suitable drainage.
• Connect the water hose securely to an adequate clean-water supply.
• Connect compatible disinfectant according to the selected farm biosecurity procedure.
• Set the disinfectant mixing ratio according to the chemical manufacturer's label instructions.
• Remove heavy mud or solid debris before final disinfection whenever practical.
• Use the supplied spray gun to rinse manure and debris from the brushes after operation.
• Inspect nylon brushes regularly and replace them when excessively worn.
• Check water hoses, valves and fittings periodically for leakage or blockage.
• Rinse the liquid system with clean water when changing disinfectant products.
• Drain residual water and protect the equipment against freezing during cold-weather shutdown.

Q: Can the machine wash and disinfect boots at the same time?
A: Yes. Water and compatible disinfectant can be supplied during brushing so cleaning and disinfection can be performed in one operating process.

Q: What material is the machine made from?
A: The main structure is manufactured from 304 stainless steel, with nylon brushes and PVC water hoses.

Q: Can the disinfectant concentration be adjusted?
A: Yes. The product includes an adjustable disinfectant supply arrangement. The final concentration should follow the disinfectant manufacturer's instructions.

Q: Does the machine clean both the sole and sides of the boot?
A: Yes. The multi-direction brush layout is designed to scrub the sole and lower external surfaces of rubber boots.

Q: Does it require electrical power?
A: The listed configuration is a manual brush-type washing station. No electrical specification is listed for the standard unit.

Q: Is it suitable for commercial pig farms?
A: Yes. It can be installed at changing-room exits, barn entrances and other controlled personnel access points as part of a farm biosecurity program.

Q: What accessories are included?
A: The listed configuration includes the main machine, a 10 m water hose and a dedicated spray gun.

Q: How should the brushes be maintained?
A: Rinse the brushes regularly to remove trapped dirt and organic matter, inspect them for wear and replace damaged or heavily worn brushes when necessary.