Mobile Personnel Disinfection Channel

• Mobile stainless steel cabinet structure
• 10 L, 15 L and 20 L configurations
• Dual upper mist discharge outlets
• Integrated operating control panel
• Caster wheels for easy relocation
• Suitable for personnel biosecurity passage applications

• Mobile Design: Caster-mounted cabinet can be moved between entrances, changing areas and temporary biosecurity checkpoints.
• Three Capacity Options: Available in 10 L, 15 L and 20 L configurations for different passage sizes and operating requirements.
• High Mist Output: Corresponding atomization outputs of approximately 10, 15 or 20 L/h provide rapid mist distribution.
• 6–18 m² Application Range: Multiple configurations are available for different treatment areas.
• Stainless Steel Cabinet: Available in 201 or 304 stainless steel according to configuration requirements.
• Fine Mist Distribution: Atomized droplets disperse throughout the designated passage area for broad surface exposure.
• Compact Footprint: Vertical cabinet design minimizes floor-space requirements.
• Farm Biosecurity Integration: Suitable for use together with changing, footwear sanitation and controlled-entry procedures.

• Pig farm personnel entrances
• Poultry farm controlled-entry passages
• Cattle and dairy farm entrances
• Breeding farm biosecurity checkpoints
• Changing-room transition areas
• Quarantine and isolation facilities
• Veterinary service areas
• Feed mill and agricultural facility entrances
• Temporary or mobile biosecurity stations

• Place the unit on a stable, level surface inside the designated personnel transition area.
• Position the mist outlets so that mist can disperse throughout the intended passage without obstruction.
• Select the 10 L, 15 L or 20 L configuration according to the required treatment area.
• Use only compatible prepared liquids suitable for the equipment and intended farm procedure.
• Follow the treatment manufacturer's instructions for dilution, handling and personal protection.
• Inspect the reservoir, mist outlets and internal atomization components regularly.
• Keep the atomization system clean and remove mineral deposits or residues when required.
• Flush the liquid-contact system with clean water when appropriate after operation.
• Lock or stabilize the caster wheels during operation to prevent unintended movement.
• Disconnect the power supply before cleaning, inspection or maintenance.

Q: What capacity options are available?
A: The product is available in 10 L, 15 L and 20 L configurations.

Q: What is the mist output?
A: The corresponding atomization outputs are approximately 10, 15 and 20 L/h depending on the selected configuration.

Q: What area can the system cover?
A: The listed application range is approximately 6–18 m² depending on the configuration and site conditions.

Q: What material is the cabinet made from?
A: The cabinet can be supplied in 201 or 304 stainless steel according to configuration requirements.

Q: Is the unit easy to move?
A: Yes. The cabinet is equipped with caster wheels for convenient relocation between personnel entrances and farm buildings.

Q: Is it suitable for commercial livestock farms?
A: Yes. It can be integrated into controlled-entry procedures for pig, poultry, cattle and other livestock facilities.

Q: Can it replace changing, hand hygiene and boot sanitation procedures?
A: No. Fine-mist treatment should be used as part of an integrated biosecurity program together with appropriate clothing, hand hygiene, footwear sanitation and access-control procedures.

Q: Can any chemical solution be used?
A: No. Only liquids approved for the intended application and compatible with the equipment should be used according to the manufacturer's instructions and farm biosecurity protocol.