Mobile Fine Mist Disinfection Fogger Cart

• Mobile stainless steel fogging cabinet
• Four upper mist discharge outlets
• High-frequency atomization system
• Integrated control panel
• Four-wheel mobile chassis
• Compact structure for livestock farm biosecurity applications

• 60 L/h Atomization Capacity: High mist output supports rapid distribution in livestock buildings and designated treatment areas.
• Four Mist Outlets: Multiple upper outlets help distribute mist in several directions for broader coverage.
• High-Frequency Atomization: Converts prepared liquid into fine droplets for improved airborne dispersion.
• 304 Stainless Steel Cabinet: Corrosion-resistant construction is suitable for humid agricultural and livestock environments.
• Mobile Cart Design: Caster wheels allow convenient movement between barns, passages and farm service areas.
• Compact Integrated Structure: Atomization components and controls are housed in one mobile cabinet for convenient operation.
• Wide Mist Distribution: Suitable for treating larger spaces compared with handheld low-output sprayers.
• Flexible Farm Application: Can be integrated into livestock-house sanitation, quarantine and biosecurity procedures according to project requirements.

• Pig house mist disinfection
• Livestock pen and aisle treatment
• Personnel biosecurity passage support
• Quarantine and isolation areas
• Poultry and cattle farm sanitation areas
• Breeding farm controlled-entry zones
• Farm equipment and service areas
• Humidification with clean water where appropriate
• General agricultural fine-mist applications

• Place the unit on a stable and level surface before operation.
• Position the four mist outlets toward the intended treatment area and keep them free from obstruction.
• Use only clean water or compatible prepared solutions suitable for the intended application.
• Follow the chemical manufacturer's instructions for dilution, application and personal protection.
• Check the atomizing heads regularly and clean deposits if mist output becomes uneven.
• Flush liquid-contact components with clean water after compatible treatment solutions when required.
• Inspect caster wheels, cabinet panels, outlets and electrical components periodically.
• Keep ventilation openings clear to prevent overheating of internal components.
• Disconnect the power supply before inspection, cleaning or maintenance.
• Store the machine in a clean, dry and frost-protected location when not in use.

Q: What is the atomization capacity?
A: The specified atomization capacity is approximately 60 liters per hour.

Q: How many mist outlets does the machine have?
A: The unit is equipped with four upper mist outlets for multi-directional distribution.

Q: What material is the cabinet made from?
A: The listed cabinet material is 304 stainless steel.

Q: Can the machine be moved between livestock houses?
A: Yes. It is mounted on caster wheels for convenient movement between designated treatment areas.

Q: Is it suitable for pig house disinfection?
A: Yes. The original configuration is designed for fine-mist treatment inside livestock housing and pig farm sanitation areas.

Q: Can it be used with a personnel disinfection passage?
A: It can be integrated into an appropriately designed farm biosecurity passage. Any treatment involving personnel should use only solutions and procedures specifically approved for that purpose.

Q: Does the machine require permanent installation?
A: No. The mobile freestanding design allows flexible positioning according to farm requirements.

Q: How should the atomizing heads be maintained?
A: Keep the outlets clean, remove mineral or chemical deposits when necessary, and flush the system with clean water according to the maintenance procedure.