Pig Farm Drinking Water Disinfection System

• Physical and Chemical Treatment: Combines filtration with controlled disinfection for more comprehensive drinking-water management.
• Particle Removal: Filtration helps reduce sand, sediment, rust and other suspended impurities before water enters downstream equipment.
• Microbial Control: Properly selected disinfectant dosing helps control microbial contamination in farm drinking water.
• Drinking-Line Sanitation: Can support routine sanitation programs for water tanks, pipelines and livestock drinking lines.
• Proportional Chemical Dosing: Dosing equipment can be configured according to farm water flow and required treatment concentration.
• Multiple Disinfection Programs: Chemical treatment can be selected according to water analysis, operating conditions and local livestock-water requirements.
• Centralized or Barn-Level Installation: Suitable for treatment at the farm water source, storage tank, barn entrance or individual drinking-water circuit.
• Modular Configuration: Filters, dosing pumps, tanks, valves, mixers and monitoring devices can be combined according to project requirements.
• Biosecurity Support: Helps reduce drinking water as a potential route for introducing and spreading contaminants within livestock facilities.
• Custom Farm Design: System capacity and component configuration can be matched to animal numbers, water consumption and source-water conditions.

• Commercial pig farms
• Sow breeding farms
• Farrowing houses
• Nursery pig houses
• Finishing pig houses
• Boar and breeding units
• Central livestock water-treatment rooms
• Drinking-water storage tanks
• Livestock drinking pipelines
• Farm biosecurity upgrade projects

• Test source water before system selection to evaluate physical, chemical and microbiological conditions.
• Size the system according to peak water demand rather than average daily consumption alone.
• Install appropriate pre-filtration upstream of the chemical dosing equipment.
• Provide sufficient mixing or contact time according to the selected disinfection program.
• Calibrate dosing equipment before livestock are supplied with treated water.
• Use only disinfectants compatible with the dosing pump, pipes, seals, drinkers and other system materials.
• Never mix incompatible disinfectants or concentrated chemicals.
• Check filters regularly and clean or replace filter elements when pressure loss increases.
• Inspect dosing pumps, seals, check valves, suction lines and chemical tanks periodically.
• Flush dosing equipment and drinking lines according to the selected chemical supplier's instructions.
• Verify water quality and disinfectant residual at representative points, including the end of the drinking line.
• After intensive line sanitation, flush the system as required before animals resume drinking.

Q: What does the drinking water disinfection system do?
A: It combines filtration and controlled disinfection to improve livestock drinking-water hygiene and support drinking-line sanitation.

Q: Is the system designed specifically for pig farms?
A: The standard application is commercial pig farming, including sow, nursery and finishing facilities.

Q: Does the system remove suspended particles?
A: Yes. Physical filtration can be configured to reduce sediment and other suspended impurities before chemical treatment.

Q: What disinfectant can be used?
A: The treatment program should be selected according to water analysis, target water quality, chemical compatibility and local regulations.

Q: Can the system disinfect drinking pipelines?
A: Yes. It can support routine drinking-line sanitation when operated with an appropriate chemical program and flushing procedure.

Q: Can the dosing process be automatic?
A: Yes. Automatic proportional dosing and monitoring functions can be configured according to project requirements.

Q: How is the required system capacity determined?
A: Capacity is selected according to animal numbers, peak water demand, source-water quality, pipe layout and the number of barns supplied.

Q: Can the system be customized for an existing farm?
A: Yes. Filtration, dosing, monitoring, storage and pipeline components can be configured for new farms or drinking-system renovation projects.