| Product Showcase
Single-animal weighing platform for cattle handling alleys and portable weighing stations. Configuration: Platform, compatible load bars and weighing indicator according to project requirements. Typical use: Cattle farms, livestock handling facilities and mixed-species agricultural projects. |
Modular Cattle Alleyway Weighing PlatformProduct Image
Product OverviewThe Modular Cattle Alleyway Weighing Platform provides a practical weighing position within a single-file livestock handling route. Its low-profile deck helps animals step onto the platform, while a traction surface supports secure footing. The platform can be specified with compatible load bars and a weighing indicator to suit the handling layout and data-recording needs of each project. The system is suitable for cattle production facilities and other livestock equipment projects where individual animal weights are needed for growth monitoring, selection, treatment planning or shipment preparation. Platform size and system configuration should be matched to the animals, alley width and site conditions. Key Features
Structural Components
Working PrincipleAn animal is guided fully onto the platform and held sufficiently still for an individual weight reading. The platform transfers the load to the bars beneath it, and the connected indicator displays the measured weight. The platform must remain clear of surrounding rails and other obstructions that could carry part of the load. Technical Specifications
ApplicationsIndividual cattle weighing in handling alleys, growth checks, herd management and pre-shipment assessment. A suitably sized configuration may also be considered for other livestock handling projects, including commercial pig farm construction, subject to animal size, flow pattern and load-bar selection. Customization OptionsPlatform width and length, deck material, traction surface, load-bar interface, indicator selection and cable arrangement can be reviewed against the project layout. Coordination with gates, handling rails and adjacent steel structure building elements is available upon request. Installation & MaintenancePlace the platform and load bars on a firm, level support surface. Follow the selected load-bar manufacturer's mounting instructions, keep the platform free from contact with nearby structures and protect cables from hoof traffic and equipment. After installation, check for rocking and verify indicator operation before weighing animals. Remove manure buildup and inspect the traction surface, mounting points and cables during routine maintenance. Product FAQDoes the platform include load bars and an indicator? Can it be used in a portable weighing setup? Can it be installed in a pig farm? Product Gallery
|



Comments & Inquiries
Leave your questions or requirements below. We will reply as soon as possible.